Datasheet4U Logo Datasheet4U.com

X40035 - Triple Voltage Monitor

Download the X40035 datasheet PDF. This datasheet also covers the X40030 variant, as both devices belong to the same triple voltage monitor family and are provided as variant models within a single manufacturer datasheet.

Description

The X40030, X40031, X40034, X40035 combine power-on reset control, watchdog timer, supply voltage supervision, second and third voltage supervision, and manual reset, in one package.

This combination lowers system cost, reduces board space requirements, and increases reliability.

Features

  • Triple voltage detection and reset assertion.
  • Standard reset threshold settings see selection table on page 5.
  • Adjust low voltage reset threshold voltages using special programming sequence.
  • Reset signal valid to VCC = 1V.
  • Monitor three seperate voltages.
  • Fault detection register.
  • Selectable power on reset timeout (0.05s, 0.2s, 0.4s, 0.8s).
  • Selectable watchdog timer interval (25ms, 200ms, 1.4s or off).
  • Debounced manua.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (X40030_IntersilCorporation.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
X4003 CPU Supervisor Xicor
X4003 CPU Supervisor Renesas
X40010 Dual Voltage Monitor with Integrated CPU Supervisor Xicor
X40010 Dual Voltage Monitor Renesas
X40011 Dual Voltage Monitor with Integrated CPU Supervisor Xicor

Other Datasheets by Intersil (Renesas)

Part Number Description
X4003 CPU Supervisor
X40030 Triple Voltage Monitor
X40031 Triple Voltage Monitor
X40034 Triple Voltage Monitor
X40020 Dual Voltage Monitor

Full PDF Text Transcription

Click to expand full text
® X40030, X40031, X40034, X40035 Data Sheet May 25, 2006 FN8114.1 PRELIMINARY Triple Voltage Monitor with Integrated CPU Supervisor FEATURES • Triple voltage detection and reset assertion —Standard reset threshold settings see selection table on page 5. —Adjust low voltage reset threshold voltages using special programming sequence —Reset signal valid to VCC = 1V —Monitor three seperate voltages • Fault detection register • Selectable power on reset timeout (0.05s, 0.2s, 0.4s, 0.8s) • Selectable watchdog timer interval (25ms, 200ms, 1.4s or off) • Debounced manual reset input • Low power CMOS —25µA typical standby current, watchdog on —6µA typical standby current, watchdog off • 400kHz 2-wire interface • 2.7V to 5.
Published: |