Datasheet4U Logo Datasheet4U.com

HS1840ARH - Rad-Hard 16 Channel CMOS Analog Multiplexer

Description

only.

Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice.

Accordingly, the reader is cautioned to verify that data sheets are current before placing orders.

Features

  • Electrically Screened to SMD # 5962-95630.
  • QML Qualified per MIL-PRF-38535 Requirements.
  • Pin-to-Pin for Intersil’s HS-1840RH and HS-1840/883S.
  • Improved Radiation Performance - Gamma Dose (γ) 3x105RAD(Si).
  • Improved rDS(ON) Linearity.
  • Improved Access Time 1.5µs (Max) Over Temp and Post Rad.
  • High Analog Input Impedance 500MΩ During Power Loss (Open).
  • ±35V Input Overvoltage Protection (Power On or Off).
  • Dielectrically.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HS18 HIGH EFFICIENCY RECTIFIERS(1.0A/600-1000V) Mospec Semiconductor
HS18035 (HS18035 - HS18045) 180 AMP SCHOTTKY RECTIFIER Microsemi Corporation
HS18040 (HS18035 - HS18045) 180 AMP SCHOTTKY RECTIFIER Microsemi Corporation
HS18045 (HS18035 - HS18045) 180 AMP SCHOTTKY RECTIFIER Microsemi Corporation
HS18135 (HS18135 - HS18145) Schottky Rectifier Microsemi Corporation

Other Datasheets by Intersil (Renesas)

Part Number Description
HS1-139RH Radiation Hardened Quad Voltage Comparator
HS1-1412RH-Q Radiation Hardened/ Quad/ High Speed/ Low Power/ Video Closed Loop Buffer
HS1-1825ARH Radiation Hardened High-Speed/ Dual Output PWM
HS1-1825ARH-8 Radiation Hardened High-Speed/ Dual Output PWM
HS1-1825ARH-Q Radiation Hardened High-Speed/ Dual Output PWM

Full PDF Text Transcription

Click to expand full text
® HS-1840ARH Data Sheet July 27, 2009 FN4355.2 www.DataSheet4U.com Rad-Hard 16 Channel CMOS Analog Multiplexer with High-Z Analog Input Protection The HS-1840ARH is a radiation hardened, monolithic 16 channel multiplexer constructed with the Intersil Rad-Hard Silicon Gate, bonded wafer, Dielectric Isolation process. It is designed to provide a high input impedance to the analog source if device power fails (open), or the analog signal voltage inadvertently exceeds the supply by up to ±35V, regardless of whether the device is powered on or off. Excellent for use in redundant applications, since the secondary device can be operated in a standby unpowered mode affording no additional power drain.
Published: |