Datasheet4U Logo Datasheet4U.com

HS1-3182-9 - ARINC 429 Bus Interface Line Driver Circuit

Description

The HS-3182 is a monolithic dielectrically isolated bipolar differential line driver designed to meet the specifications of ARINC 429.

Features

  • TTL and CMOS Compatible Inputs.
  • Adjustable Rise and Fall Times via Two External Capacitors.
  • Programmable Output Differential Voltage via VREF Input.
  • Operates at Data Rates Up to 100 Kilobits/Sec.
  • Output Short Circuit Proof and Contains Over-Voltage Protection.
  • Outputs are Inhibited (0 Volts) If DATA (A) and DATA (B) Inputs are Both in the “Logic One” State.
  • DATA (A) and DATA (B) Signals are “AND’d” with Clock and Sync Signals.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HS1-82C37ARH-8 Radiation Hardened CMOS High Performance Programmable DMA Controller Harris Corporation
HS1-82C37ARH-Q Radiation Hardened CMOS High Performance Programmable DMA Controller Harris Corporation
HS1-82C37ARH-Sample Radiation Hardened CMOS High Performance Programmable DMA Controller Harris Corporation
HS10 Feed Sensor Hog Slat
HS100 Crystal Clock Oscillators NEL

Other Datasheets by Intersil (Renesas)

Part Number Description
HS1-3182-8 ARINC 429 Bus Interface Line Driver Circuit
HS1-302RH Radiation Hardened CMOS Analog Switches
HS1-302RH-T Radiation Hardened CMOS Dual DPST Analog Switch
HS1-302RH883S Radiation Hardened CMOS Analog Switches
HS1-303RH Radiation Hardened CMOS Analog Switches

Full PDF Text Transcription

Click to expand full text
HS-3182 March 1997 ARINC 429 Bus Interface Line Driver Circuit Description The HS-3182 is a monolithic dielectrically isolated bipolar differential line driver designed to meet the specifications of ARINC 429. This Device is intended to be used with a companion chip, HS-3282 CMOS ARINC Bus Interface Circuit, which provides the data formatting and processor interface function. All logic inputs are TTL and CMOS compatible. In addition to the DATA (A) and DATA (B) inputs, there are also inputs for CLOCK and SYNC signals which are AND’d with the DATA inputs. This feature enhances system performance and allows the HS-3182 to be used with devices other than the HS-3182. Three power supplies are necessary to operate the HS-3182: +V = +15V ± 10%, -V = -15V ± 10%, and V1 = 5V ± 5%.
Published: |