Datasheet4U Logo Datasheet4U.com

HS1-26CT32RH-T - Radiation Hardened Quad Differential Line Receiver

Description

only.

Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice.

Accordingly, the reader is cautioned to verify that data sheets are current before placing orders.

Features

  • QML Class T, Per MIL-PRF-38535.
  • Radiation Performance - Gamma Dose.
  • 1 x 105 RAD(Si) - SEU and SEL.
  • Immune to 100MeV/mg/cm2.
  • EIA RS-422 Compatible Inputs.
  • TTL Compatible Enable Inputs.
  • Input Fail Safe Circuitry.
  • High Impedance Inputs when Disabled or Powered Down.
  • Low Power Dissipation 138mW Standby (Max).
  • Single 5V Supply.
  • Full -55oC to 125oC Military Temperature.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HS1-82C37ARH-8 Radiation Hardened CMOS High Performance Programmable DMA Controller Harris Corporation
HS1-82C37ARH-Q Radiation Hardened CMOS High Performance Programmable DMA Controller Harris Corporation
HS1-82C37ARH-Sample Radiation Hardened CMOS High Performance Programmable DMA Controller Harris Corporation
HS10 Feed Sensor Hog Slat
HS100 Crystal Clock Oscillators NEL

Other Datasheets by Intersil (Renesas)

Part Number Description
HS1-26CT32RH Radiation Hardened Quad Differential Line Receiver
HS1-26CT31RH Radiation Hardened Quad Differential Line Driver
HS1-26CT31RH-8 Radiation Hardened Quad Differential Line Driver
HS1-26CT31RH-Q Radiation Hardened Quad Differential Line Driver
HS1-26CT31RH-T Radiation Hardened Quad Differential Line Driver

Full PDF Text Transcription

Click to expand full text
HS-26CT32RH-T Data Sheet July 1999 File Number 4593.1 Radiation Hardened Quad Differential Line Receiver Intersil’s Satellite Applications FlowTM (SAF) devices are fully tested and guaranteed to 100kRAD total dose. These QML Class T devices are processed to a standard flow intended to meet the cost and shorter lead-time needs of large volume satellite manufacturers, while maintaining a high level of reliability. The Intersil HS-26CT32RH-T is a Quad Differential Line Receiver designed for digital data transmission over balanced lines and meets the requirements of EIA Standard RS-422. Radiation Hardened CMOS processing assures low power consumption, high speed, and reliable operation in the most severe radiation environments. The HS-26CT32RH-T has an input sensitivity of 200mV (typ.
Published: |