Datasheet4U Logo Datasheet4U.com

HMP8191 - NTSC/PAL Video Encoder

Description

are in the Applications section.

MACROVISION v7.01 No Yes TEMP.

RANGE (oC) 0 to 70 0 to 70 PACKAGE 64 Ld PQFP (Note 2) 64 Ld PQFP (Note 2) PKG.

Features

  • (M) NTSC and (B, D, G, H, I, M, N, NC) PAL Operation.
  • BT.601 and Square Pixel Operation.
  • Digital Input Formats - 8-Bit, 16-Bit 4:2:2 YCbCr - 8-Bit BT.656.
  • Composite and Y/C Analog Outputs.
  • Flexible Video Timing Control - Timing Master or Slave - Selectable Polarity on Each Control Signal - Programmable Blank Output Timing.
  • “Sliced” VBI Data Support - Closed Captioning - Widescreen Signalling (WSS).
  • Three 2x Oversampling, 10-Bit DACs.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HMP8112 NTSC/PAL Video Decoder Harris
HMP112F7EFR8C-S5 240pin Fully Buffered DDR2 SDRAM DIMMs Hynix
HMP112F7EFR8C-S6D3 240pin Fully Buffered DDR2 SDRAM DIMMs Hynix
HMP112F7EFR8C-S6D5 240pin Fully Buffered DDR2 SDRAM DIMMs Hynix
HMP112F7EFR8C-Y5 240pin Fully Buffered DDR2 SDRAM DIMMs Hynix

Other Datasheets by Intersil (Renesas)

Part Number Description
HMP8190 NTSC/PAL Video Encoder
HMP8115 NTSC/PAL Video Decoder
HMP8116 NTSC/PAL Video Decoder
HMP8117 NTSC/PAL Video Decoder
HMP8154 NTSC/PAL Encoders

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HMP8190, HMP8191 Data Sheet May 1999 File Number 4499.1 NTSC/PAL Video Encoder The HMP8190 and HMP8191 are NTSC and PAL encoders designed for use in systems requiring the generation of highquality NTSC and PAL video. YCbCr digital video data drive the P0-P15 inputs. The Y data is optionally lowpass filtered to 6MHz and drives the Y analog output. Cb and Cr are each lowpass filtered to 1.3MHz, quadrature modulated, and added together. The result drives the C analog output. The digital Y and C data are also added together and drive the composite analog output. The DACs can drive doubly-terminated (37.5Ω) lines, and run at a 2x oversampling rate to simplify the analog output filter requirements. Features • (M) NTSC and (B, D, G, H, I, M, N, NC) PAL Operation • BT.
Published: |