Datasheet4U Logo Datasheet4U.com

HIN234 - +5V Powered RS-232 Transmitters/Receivers

Download the HIN234 datasheet PDF. This datasheet also covers the HIN variant, as both devices belong to the same +5v powered rs-232 transmitters/receivers family and are provided as variant models within a single manufacturer datasheet.

Description

PIN VCC V+ VGND C1+ C1C2+ C2TIN TOUT RIN ROUT EN SHUTDOWN NC Power Supply Input 5V ±10%.

Internally generated positive supply (+10V nominal), HIN231 and HIN239 require +7.5V to +13.2V.

Internally generated negative supply (-10V nominal).

Features

  • Meets All RS-232E and V.28 Specifications.
  • Requires Only Single +5V Power Supply - (+5V and +12V - HIN231 and HIN239).
  • High Data Rate.
  • . . 120kbps.
  • HIN233 and HIN235 Require No External Capacitors.
  • Onboard Voltage Doubler/Inverter.
  • Low Power Consumption.
  • Low Power Shutdown Function.
  • Three-State TTL/CMOS Receiver Outputs.
  • Multiple Drivers - ±10V Output Swing for 5V lnput - 3.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (HIN-232.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
HIN232 +5V Powered RS-232 Transmitters/Receivers Renesas
HIN232E RS-232 Transmitters/Receivers Renesas
HIN236 +5V Powered RS-232 Transmitters/Receivers Renesas
HIN237 +5V Powered RS-232 Transmitters/Receivers Renesas
HIN238 +5V Powered RS-232 Transmitters/Receivers Renesas

Other Datasheets by Intersil (Renesas)

Part Number Description
HIN230 +5V Powered RS-232 Transmitters/Receivers
HIN231 +5V Powered RS-232 Transmitters/Receivers
HIN232 +5V Powered RS-232 Transmitters/Receivers
HIN232A High Speed +5V Powered RS-232 Transmitters/Receivers
HIN232E +/-15kV/ ESD-Protected/ +5V Powered/RS-232 Transmitters/Receivers

Full PDF Text Transcription

Click to expand full text
HIN230 thru HIN241 TM Data Sheet May 2000 File Number 3138.7 +5V Powered RS-232 Transmitters/Receivers The HIN230-HIN241 family of RS-232 transmitters/receivers interface circuits meet all ElA RS-232E and V.28 specifications, and are particularly suited for those applications where ±12V is not available. They require a single +5V power supply (except HIN231 and HIN239) and feature onboard charge pump voltage converters which generate +10V and -10V supplies from the 5V supply. The HIN233 and HIN235 require no external capacitors and are ideally suited for applications where circuit board space is critical. The family of devices offer a wide variety of RS-232 transmitter/receiver combinations to accommodate various applications (see Selection Table).
Published: |