Datasheet4U Logo Datasheet4U.com

HA4201CB - 480MHz/ 1 x 1 Video Crosspoint Switch with Tally Output

Features

  • very low power dissipation (105mW Enabled, 1mW Disabled), excellent differential gain and phase, and very high off isolation. When disabled, the output is switched to a high impedance state, making the HA4201 ideal for routing matrix equipment. The HA4201 requires no external current source, and features fast switching and symmetric slew rates. The tally output is an open collector PNP transistor to VCC , and is activated whenever EN = 1 to provide an indication of crosspoint selection. For appl.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HA4000-AL Planar Transformer Coilcraft
HA40101V4-0000-999 DC Fan SUNON
HA4018-AL Flyback Transformer Coilcraft
HA4060-AL Flyback Transformer Coilcraft
HA4061-AL Flyback Transformer Coilcraft

Other Datasheets by Intersil (Renesas)

Part Number Description
HA4201CB96 480MHz/ 1 x 1 Video Crosspoint Switch with Tally Output
HA4201 480MHz/ 1 x 1 Video Crosspoint Switch with Tally Output
HA4-2546883 Wideband Two Quadrant Analog Multiplier (Voltage Output)
HA4-5020883 100MHz Current Feedback Video Amplifier with Disable
HA4-5104883 Low Noise/ High Performance/ Quad Operational Amplifier

Full PDF Text Transcription

Click to expand full text
HA4201 Data Sheet September 1998 File Number 3680.4 480MHz, 1 x 1 Video Crosspoint Switch with Tally Output The HA4201 is a very wide bandwidth 1 x 1 crosspoint switch ideal for professional video switching, HDTV, computer monitor routing, and other high performance applications. The circuit features very low power dissipation (105mW Enabled, 1mW Disabled), excellent differential gain and phase, and very high off isolation. When disabled, the output is switched to a high impedance state, making the HA4201 ideal for routing matrix equipment. The HA4201 requires no external current source, and features fast switching and symmetric slew rates. The tally output is an open collector PNP transistor to VCC , and is activated whenever EN = 1 to provide an indication of crosspoint selection.
Published: |