Download the LXT907 datasheet PDF.
This datasheet also covers the LXT901 variant, as both devices belong to the same (lxt901 / lxt907) universal 10 base-t and aui transceivers family and are provided as variant models within a single manufacturer datasheet.
General Description
at any time, without notice.
Key Features
Functional Features
s s s s
Integrated Manchester Encoder/Decoder 10BASE-T Transceiver AUI Transceiver Full-Duplex Capable (20 Mbps)
Diagnostic Features
s s s
Four LED Drivers AUI/RJ45 Loopback Remote Signaling of Link Down and Jabber conditions
w
w
w
. D
t a
S a
e h
s s s s s s s
s
Computer/Workstation 10BASE-T LAN adapters
t e
U 4
. c
m o
Convenience Features
Automatic/Manual AUI/RJ45 Selection Automatic Polarity Correction SQE Disable function (LXT907 only) Programmable Impedan.
Full PDF Text Transcription for LXT907 (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
LXT907. For precise diagrams, tables, and layout, please refer to the original PDF.
w w w .D a S a t . U LXT901/907 4 t e 10BASE-T and AUI Transceivers Universal e h m o c Datasheet The LXT901 and LXT907 Universal 10BASE-T and AUI Transceivers are design...
View more extracted text
e LXT901 and LXT907 Universal 10BASE-T and AUI Transceivers are designed for IEEE 802.3 physical layer applications. They provide all the active circuitry to interface most standard 802.3 controllers to either the 10BASE-T media or Attachment Unit Interface (AUI). In addition to standard 10 Mbps Ethernet, they also support full-duplex operation at 20 Mbps. The LXT901 and LXT907 are identical except for the function of one pin. The LXT901 offers selectable termination impedance to allow the use of either shielded or unshielded twisted-pair cable. The LXT907 offers a signal quality error (SQE) disable function.
LXT907 Datasheet
