Datasheet4U Logo Datasheet4U.com

MK2727 - Low Cost 27 MHz VCXO

General Description

The MK2727 is MicroClock’s lowest cost, low jitter, high performance VCXO and PLL clock synthesizer designed to replace expensive 27MHz VCXOs.

The on-chip Voltage Controlled Crystal Oscillator accepts a 0 to 3V input voltage to cause the output clocks to vary by ±100 ppm.

Key Features

  • Packaged in 8 pin narrow SOIC.
  • Uses an inexpensive 13.500 MHz external crystal.
  • On-chip VCXO (patented) with pull range of 200ppm (minimum).
  • VCXO tuning voltage of 0 to 3V.
  • 25mA output drive capability at TTL levels.
  • Advanced, low power, sub-micron CMOS process.
  • 5V operating voltage Block Diagram VIN X1 13.5 MHz pullable crystal X2 Voltage Controlled Crystal Oscillator PLL/Clock Synthesis Circuitry Output Buffer 27MHz MDS 2.

📥 Download Datasheet

Datasheet Details

Part number MK2727
Manufacturer Integrated Circuit Systems
File Size 55.54 KB
Description Low Cost 27 MHz VCXO
Datasheet download datasheet MK2727 Datasheet

Other Datasheets by Integrated Circuit Systems

Part Number Description
MK2703 PLL Audio Clock Synthesizer
MK2703B PLL AUDIO CLOCK SYNTHESIZER
MK2704 PLL Audio Clock Synthesizer
MK2712 NTSC/PAL Clock
MK2716 HDTV Clock Synthesizer
MK2731-03C MPEG Audio Clock Synthesizer
MK2731-04C MPEG Audio Clock
MK2732-05 Low Phase Noise VCXO+Multiplier
MK2732-06 Low Phase Noise VCXO+Multiplier
MK2745-21 DVD/MPEG Clock Source

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MK2727 Low Cost 27 MHz VCXO Description The MK2727 is MicroClock’s lowest cost, low jitter, high performance VCXO and PLL clock synthesizer designed to replace expensive 27MHz VCXOs. The on-chip Voltage Controlled Crystal Oscillator accepts a 0 to 3V input voltage to cause the output clocks to vary by ±100 ppm. Using MicroClock’s patented VCXO and analog PhaseLocked Loop (PLL) techniques, the device uses an inexpensive external 13.5 MHz pullable crystal input to produce a 27 MHz output clock. MicroClock manufactures the largest variety of Set-Top Box and multimedia clock synthesizers for all applications. If more clock outputs are needed, see the MK2731 or MK277x family of parts. Consult MicroClock to eliminate VCXOs, crystals and oscillators from your board.