Datasheet4U Logo Datasheet4U.com

TLD2372-3ET - three channel low-side driver

General Description

The TLD2372-3ET is a three channel low-side driver IC with integrated and protected output stages.

It is designed to control LEDs with a current up to 150 mA as linear current sink (LCS).

Key Features

  • Three-channel device with integrated and protected output stages (current sinks), optimized to drive LEDs.
  • High output current up to 150 mA per channel.
  • Possibility to offload power consumption via low cost external resistors to allow maximum current driving capability (Power Shift).
  • Output current control via enable pin.
  • Fault management supports both 1-fail-all-OFF and 1-fail-all-ON.
  • Analog output current control input to adjust the output.

📥 Download Datasheet

Other Datasheets by Infineon

Part Number Description
TLD2310EL 3 Channel High Side Current Source
TLD2311EL Basic LED Driver
TLD2314EL Basic LED Driver
TLD2326EL three channel high side driver
TLD2331-3EP triple channel high-side driver
TLD2362-3ET three channel low-side driver
TLD2382-3ET a three channel low-side driver
TLD2131-3EP triple channel high-side driver
TLD2132-1EP single channel high-side driver
TLD2141-3EP triple channel high-side driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TLD2372-3ET Datasheet LITIX™ Basic+ Features • Three-channel device with integrated and protected output stages (current sinks), optimized to drive LEDs • High output current up to 150 mA per channel • Possibility to offload power consumption via low cost external resistors to allow maximum current driving capability (Power Shift) • Output current control via enable pin • Fault management supports both 1-fail-all-OFF and 1-fail-all-ON • Analog output current control input to adjust the output current • Open load (OL), short to battery (SC) and thermal shutdown protections • Intelligent fault management: up to 10 devices can share a common error network with only one external resistor • Thermal derating function via external NTC resistor Potential applications • Cost effective "stop"/"tail"