Datasheet4U Logo Datasheet4U.com

ILX75176 - Slew-Rate-Limited RS-485/RS-422 Transceivers

Description

and RS- 422 communication.

IC contains one driver and one receiver.

The driver slew rates of the ILX75176 is not limited, allowing them to transmit up to 10 Mbps.

Features

  • Device ILX75176N ILX75176D ILX75176DT Operating Temperature Range TA = 0 to 70 C Package DIP8 SOP8 SOP8 Shipping Tube Tube Tape & Reel.
  • Low Quiescent Current: 300µA.
  • -7V to +12V Common-Mode Input Voltage Range.
  • Three-State Outputs.
  • 50ns Propagation Delays, 5ns Skew.
  • Half-Duplex Versions Available.
  • Operate from a Single 5V Supply.
  • Allows up to 32 Transceivers on the Bus.
  • Data rate: 10 Mbps.
  • Current-Limiting and Thermal Shutdown for Driver Overlo.

📥 Download Datasheet

Datasheet Details

Part number ILX75176
Manufacturer IK Semiconductor
File Size 428.20 KB
Description Slew-Rate-Limited RS-485/RS-422 Transceivers
Datasheet download datasheet ILX75176 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ILX751A 2048-pixel CCD Linear Sensor Sony Corporation
ILX751B 2048-pixel CCD Linear Sensor Sony Corporation
ILX703A 2048-pixel CCD Linear Image Sensor Sony Corporation
ILX716K 3648 X 3pixel CCD Linear Sensor Sony Corporation
ILX718K 5363-pixel X 3 line CCD Linear Sensor Sony Corporation

Other Datasheets by IK Semiconductor

Part Number Description
ILX232 Drivers/Receivers
ILX3085 Interface Transceiver
ILX3221 Interface Transceiver of the Serial Data of RS-232 Standard
ILX3221ESD Interface Transceiver of the Serial Data of RS-232 Standard
ILX3221ESDT Interface Transceiver of the Serial Data of RS-232 Standard

Full PDF Text Transcription

Click to expand full text
TECHNICAL DATA Low-Power, Slew-Rate-Limited RS-485/RS-422 Transceivers ILX75176 Description The ILX75176 is low-power transceivers for RS-485 and RS- 422 communication. IC contains one driver and one receiver. The driver slew rates of the ILX75176 is not limited, allowing them to transmit up to 10 Mbps. These transceivers draw between 120µA and 500µA of supply current when unloaded or fully loaded with disabled drivers. All parts operate from a single 5V supply. Drivers are short-circuit current limited and are protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a highimpedance state. The receiver input has a fail-safe feature that guarantees a logic-high output if the input is open circuit.
Published: |