Datasheet4U Logo Datasheet4U.com

HT46R73D-1 - Dual Slope A/D Type MCU

Description

The HT46R73D-1 is an 8-bit high performance, RISC architecture microcontroller device specifically designed for A/D with LCD applications that interface directly to analog signals, such as those from sensors.

Features

  • Operating voltage:.
  • On-chip RC or crystal oscillator.
  • HALT function and wake-up feature reduce power fSYS=4MHz: 2.2V~5.5V fSYS=8MHz: 3.3V~5.5V.
  • 12 bidirectional I/O lines and two ADC input.
  • One external interrupt input shard with an I/O lines.
  • One 8-bit and one 16-bit programmable timer/event consumption.
  • Voltage regulator (3.3V) and charge pump.
  • Embeded voltage reference generator (1.5V).
  • 4-level subroutine nesting.
  • Bit manipulation instructi.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HT46R22 8-Bit A/D Type MCU Holtek Semiconductor Inc
HT46R221 8-Bit A/D Type MCU Holtek Semiconductor Inc
HT46R23 8-Bit OTP Microcontroller Holtek Semiconductor Inc
HT46R64 A/D with LCD Type 8-Bit MCU Holtek Semiconductor Inc
HT4633 Single chip LED flashlight controller HOTCHIP

Other Datasheets by Holtek Semiconductor

Part Number Description
HT46R73D-3 Dual Slope A/D Type 8-Bit OTP MCU
HT46R71D A/D with LCD Type 8-Bit MCU
HT46R71D-1 Dual Slope A/D Type MCU
HT46R72D-1 Dual Slope A/D Type MCU
HT46R74D-1 Dual Slope A/D Type MCU

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com HT46R73D-1 Dual Slope A/D Type MCU with LCD Technical Document · Tools Information · FAQs · Application Note - HA0003E Communicating between the HT48 & HT46 Series MCUs and the HT93LC46 EEPROM - HA0004E HT48 & HT46 MCU UART Software Implementation Method - HA0005E Controlling the I2C bus with the HT48 & HT46 MCU Series - HA0007E Using the MCU Look Up Table Instructions - HA0049E Read and Write Control of the HT1380 Features · Operating voltage: · On-chip RC or crystal oscillator · HALT function and wake-up feature reduce power fSYS=4MHz: 2.2V~5.5V fSYS=8MHz: 3.3V~5.5V · 12 bidirectional I/O lines and two ADC input · One external interrupt input shard with an I/O lines · One 8-bit and one 16-bit programmable timer/event consumption · Voltage regulator (3.
Published: |