Datasheet4U Logo Datasheet4U.com

HI-8200 - Quad 10-Ohm +/-12V outside-the-rails Analog Switch

Description

The HI-8200 is a quad analog CMOS switch fabricated with Silicon-on-Insulator (SOI) technology for latch-up free operation and maximum switch isolation.

High voltage gate drive is entirely created on-chip enabling +/-12V switching range from a single 3.3V or 5V supply.

Features

  • CMOS analog switches with up to +/-12V switching range from a single 3.3V or 5V supply.
  • Low RON: 10W max at 25°C.
  • Robust CMOS Silicon-on-Insulator (SOI) technology.
  • Switch nodes are open-circuit when chip is powered down.
  • SOI switch isolation with 1nA typical Off leakage.
  • ESD protection > 4KV HBM.
  • Fast switching time with break-before-make.
  • Low power.
  • Extended Temperature Range (-55°C to +125°C) PIN.

📥 Download Datasheet

Datasheet Details

Part number HI-8200
Manufacturer Holt Integrated Circuits
File Size 133.93 KB
Description Quad 10-Ohm +/-12V outside-the-rails Analog Switch
Datasheet download datasheet HI-8200 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HI-8045 CMOS HIGH VOLTAGE DISPLAY DRIVER Holt Integrated
HI-8050 CMOS High Voltage Display Driver HOLTIC
HI-8051 CMOS High Voltage Display Driver HOLTIC
HI-8150 CMOS High Voltage Display Driver HOLTIC
HI-8151 CMOS High Voltage Display Driver HOLTIC

Other Datasheets by Holt Integrated Circuits

Part Number Description
HI-8201 Quad 10-Ohm +/-12V outside-the-rails Analog Switch
HI-8202 Quad 10-Ohm +/-12V outside-the-rails Analog Switch
HI-8281 ARINC 429 LINE DRIVER AND DUAL RECEICER
HI-8282 ARINC 429 SERIAL TRANSMITTER AND DUAL RECEIVER
HI-8282A ARINC 429 SERIAL TRANSMITTER AND DUAL RECEIVER

Full PDF Text Transcription

Click to expand full text
November 2017 HI-8200, HI-8201, HI-8202 Quad 10 Ohm +/-12V outside-the-rails Analog Switch with Open Circuit when Power Off GENERAL DESCRIPTION The HI-8200 is a quad analog CMOS switch fabricated with Silicon-on-Insulator (SOI) technology for latch-up free operation and maximum switch isolation. High voltage gate drive is entirely created on-chip enabling +/-12V switching range from a single 3.3V or 5V supply. These switches are ideally suited for applications demanding low switch leakage when the power pins are 0V. At 25°C and with VDD from 3.0V to 5.5V, the switch resistance (RON) is typically 8W. RON is independent of VDD. In a switching range of -5V to +5V, the maximum deviation of RON from flat is less than 5%. These switches conduct equally well in either direction.
Published: |