Datasheet4U Logo Datasheet4U.com

HMC941A - 0.5dB LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR

Datasheet Summary

Description

The HMC941A die is a broadband 5-bit GaAs IC digital attenuator MMIC chip.

Covering 0.1 to 30 GHz, the insertion loss is less than 4 dB typical.

The attenuator bit values are 0.5 (LSB), 1, 2, 4, 8, for a total attenuation of 15.5 dB.

Features

  • 0.5 dB LSB Steps to 15.5 dB Single Positive Control Line Per Bit ±0.5 dB Typical Bit Error High Input IP3: +45 dBm Die Size: 2.35 x 1 x 0.1 mm Functional Diagram General.

📥 Download Datasheet

Datasheet preview – HMC941A

Datasheet Details

Part number HMC941A
Manufacturer Hittite Microwave Corporation
File Size 279.33 KB
Description 0.5dB LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR
Datasheet download datasheet HMC941A Datasheet
Additional preview pages of the HMC941A datasheet.

📁 Similar Datasheet

Other Datasheets by Hittite Microwave Corporation
  • HMC941 - 0.5dB LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR
  • HMC907 - 1/2 Watt Power Amplifier
  • HMC911LC4B - BROADBAND ANALOG TIME DELAY
  • HMC980 - Active Bias Controller
  • HMC980LP4E - ACTIVE BIAS CONTROLLER
  • HMC981 - ACTIVE BIAS CONTROLLER
  • HMC985 - Gaas mmic voltage
  • HMC-ALH102 - GaAs HEMT MMIC WIDEBAND LOW NOISE AMPLIFIER

Full PDF Text Transcription

Click to expand full text
ATTENUATORS - CHIP HMC941A v01.1016 0.5 dB LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR, 0.1 - 30 GHz 1 Typical Applications The HMC941A is ideal for: • Fiber Optics & Broadband Telecom • Microwave Radio & VSAT • Military Radios, Radar & ECM • Space Applications Features 0.5 dB LSB Steps to 15.5 dB Single Positive Control Line Per Bit ±0.5 dB Typical Bit Error High Input IP3: +45 dBm Die Size: 2.35 x 1 x 0.1 mm Functional Diagram General Description The HMC941A die is a broadband 5-bit GaAs IC digital attenuator MMIC chip. Covering 0.1 to 30 GHz, the insertion loss is less than 4 dB typical. The attenuator bit values are 0.5 (LSB), 1, 2, 4, 8, for a total attenuation of 15.5 dB. Attenuation accuracy is excellent at less than ± 0.5 dB typical step error with an IIP3 of +45 dBm.
Published: |