Datasheet4U Logo Datasheet4U.com

HD75161A - Octal General Purpose Interface Bus Transceivers

Description

The HD75161A is an 8 channel general purpose interface bus transceiver designed to meet the requirements of IEEE standard 488-1978.

The transceiver is to provide the bus management and data transfer signals during operating in a controller instrumentation system.

Features

  • eight driver receiver pairs connected in a front to back configureation to form input/output ports at both the bus and terminal sides. The direction of data through these driver receiver pairs is determined by the DC and TE enable signals. The device exhibits a high impedance to the bus when VCC = 0 V since the bus terminating resistors are built in. If featurs driver outputs which can handle loads up to 48 mA of sink current. Each receiver features p n p transistor inputs for high input impedan.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HD75153 Quadruple Differential Line Drivers With 3 State Outputs ETC
HD75173 Quadruple Differential Line Receivers With 3 State Outputs Renesas Technology
HD7279A HD7279A Bitcode
HD7279A HD7279A ETC
HD7400 TTL HD74/HD74S Series Renesas Technology

Other Datasheets by Hitachi Semiconductor (now Renesas)

Part Number Description
HD75159 Dual Differential Line Drivers With 3 State Outputs
HD74AC00 Quad 2-Input NAND Gate
HD74AC02 Quad 2-Input NOR Gate
HD74AC04 Hex Inverter
HD74AC08 Quad 2-Input AND Gate

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com HD75161A Octal General Purpose Interface Bus Transceivers ADE-205-591 (Z) 1st. Edition Dec. 2000 Description The HD75161A is an 8 channel general purpose interface bus transceiver designed to meet the requirements of IEEE standard 488-1978. The transceiver is to provide the bus management and data transfer signals during operating in a controller instrumentation system. When combined with the HD75160A octal bus transceiver, the HD75161A provides the complete 16 wire interface for the IEEE 488 bus. The HD75161A features eight driver receiver pairs connected in a front to back configureation to form input/output ports at both the bus and terminal sides. The direction of data through these driver receiver pairs is determined by the DC and TE enable signals.
Published: |