Datasheet4U Logo Datasheet4U.com

HD155121F - RF Transceiver IC for GSM and PCN Dual band cellular systems

Description

The HD155121F is a RF transceiver IC for GSM and PCN dual band cellular systems, and integrates most of the low power silicon functions of a transceiver.

Features

  • Highly integrated RF processing for hand-portables.
  • Operating supply voltage  VCC : 2.7 to 3.6 V  Phase comparator and TXVCO driver circuit : 2.7 to 5.25 V.
  • Current consumption  Rx mode (GSM) : 53 mA + LNA current  Rx mode (PCN) : 52 mA + LNA current  Tx mode (GSM) : 36 mA  Tx mode (PCN) : 37 mA  Idle mode :1 µA.
  • Operating temperature :.
  • 20 to +75 degree.
  • LQFP 48pin SMD (Low Profile Quad Flat Package).
  • Wide operating frequenci.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HD155131TF RF Transceiver IC Hitachi
HD155001T Prescaler PLL Frequency Synthesizer Hitachi
HD155004T Prescaler PLL Frequency Synthesizer Hitachi
HD155007T High Speed Prescaler Dual PLL Frequency Synthesizer Hitachi
HD155008T High Speed Prescaler Dual PLL Frequency Synthesizer Hitachi

Other Datasheets by Hitachi Semiconductor (now Renesas)

Part Number Description
HD155101BF RF Single-chip Linear IC for GSM and EGSM Systems
HD155111F RF Single-chip Linear IC for PCN Cellular Systems
HD151011 Dual BCD Programmable Counter with Synchronous Preset Enable
HD151012 8-bit Binary Programmable Counter with Synchronous Preset Enable
HD151015 9 bit Level Shifter/Transceiver With 3 State Outputs

Full PDF Text Transcription

Click to expand full text
HD155121F RF Transceiver IC for GSM and PCN Dual band cellular systems ADE-207-265A (Z) 2nd Edition May 1999 Description The HD155121F is a RF transceiver IC for GSM and PCN dual band cellular systems, and integrates most of the low power silicon functions of a transceiver. The HD155121F incorporates two bias circuits for RF LNAs, two first mixers, a second mixer, a programmable gain amplifier, and an IQ demodulator for the receiver, and an IQ modulator and offset PLL for the transmitter. Also, on chip are dividers for the phase splitter. Moreover the HD155121F includes control circuits to implement power saving modes. These functions can operate down to 2.7 V and are housed in a 48-pin LQFP SMD package.
Published: |