Datasheet4U Logo Datasheet4U.com

HA16138PS - AC/DC Switching Converter Controller IC With High-Voltage Power MOS FET

Description

The HA16138PS is an IC with a high-voltage power MOS FET and current-mode type PWM controller mounted in a DILP-8 (DP-8) standard package, suitable for low-power power supplies in the 10 W class and below.

Features

  • Built-in high-voltage power MOS FET.
  • Energy-saving mode (power saving through reduction of operating frequency to 1/4 normal frequency when on standby).
  • Built-in starter circuit, reducing power loss of start-up resistance when on standby (external start-up resistance not necessary).
  • Built-in soft start circuit, eliminating need for external connection.
  • Remote on/off function, enabling power saving by halting PWM output without turning off power suppl.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HA16150P High-Speed Current Mode Push-Pull PWM Control IC Renesas Technology
HA16150T High-Speed Current Mode Push-Pull PWM Control IC Renesas Technology
HA16158FP PFC & PWM Control IC Renesas Technology
HA16158P PFC & PWM Controller Renesas Technology
HA16163T Synchronous Phase Shift Full-Bridge Control IC Renesas Technology

Other Datasheets by Hitachi Semiconductor (now Renesas)

Part Number Description
HA16103FPJ Watchdog Timer
HA16103FPK Watchdog Timer
HA16107FP PWM Switching Regulator
HA16107P PWM Switching Regulator
HA16108FP PWM Switching Regulator

Full PDF Text Transcription

Click to expand full text
HA16138PS AC/DC Switching Converter Controller IC With High-Voltage Power MOS FET ADE-204-032 (Z) Preliminary 1st Edition MAY 2000 Description The HA16138PS is an IC with a high-voltage power MOS FET and current-mode type PWM controller mounted in a DILP-8 (DP-8) standard package, suitable for low-power power supplies in the 10 W class and below. The HA16138PS includes an energy-saving mode for holding down power consumption when on standby (no load). When the energy-saving mode is entered, the operating frequency is reduced to 1/4 the normal frequency, reducing power consumption. A starter circuit is also provided on-chip, eliminating the need for the external start-up resistance needed with previous controller ICs.
Published: |