Datasheet4U Logo Datasheet4U.com

HLM358S - Low Power Dual Operational Ampilfiers

Download the HLM358S datasheet PDF. This datasheet also covers the HLM358P-Hi variant, as both devices belong to the same low power dual operational ampilfiers family and are provided as variant models within a single manufacturer datasheet.

Description

These devices consist of two independent, high gain, internally frequencycompensated operational amplifiers designed operate from a single supply over a wide range of voltages.

Features

  • Two internally compensated OP amps.
  • Internally frequency compensated for unity gain.
  • Short Circuit Protected Outputs.
  • Wide power supply range: 3VDC to 40VDC (Single supply).
  • Input common-mode voltage range includes ground.
  • Large output voltage swing: 0VDC to Vcc-1.5VDC Logic Diagram (each amplifier) IN + IN - + OUTPUT - Pin Configurations Pin 1: Output 1 1 2 3 4 Out Pin 5 : Non Inverting Input 2 Pin 6 : Inverting Input 2 Pin 7 : Output 2.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (HLM358P-Hi-Sincerity.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number HLM358S
Manufacturer Hi-Sincerity
File Size 230.81 KB
Description Low Power Dual Operational Ampilfiers
Datasheet download datasheet HLM358S Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HLM1230 5mW RED LASER MODULE HOWARD BATCHEN
HLM6323-013211 MONO STN DISPLAY HOSIDEN
HLM8619-010200 MONO STN DISPLAY HOSIDEN
HLM8619-010300 MONO STN DISPLAY HOSIDEN
HLM8619-010500 MONO STN DISPLAY HOSIDEN

Other Datasheets by Hi-Sincerity

Part Number Description
HLM358P Low Power Dual Operational Ampilfiers

Full PDF Text Transcription

Click to expand full text
HI-SINCERITY MICROELECTRONICS CORP. Spec. No. : IC200409 Issued Date : 2004.05.01 Revised Date : 2009.08.20 Page No. : 1/6 HLM358P / HLM358S Low Power Dual Operational Amplifiers Description These devices consist of two independent, high gain, internally frequencycompensated operational amplifiers designed operate from a single supply over a wide range of voltages. Operation from split supplies also is possible if the difference between the two supplies is 3V to 40V, and Vcc is at least 1.5V more positive than the input common-mode voltage, The low supply-current drain is independent of the magnitude of the power supply voltage.
Published: |