Datasheet4U Logo Datasheet4U.com

S6493 - (S6493 - S6495) Photodiode

Datasheet Summary

Features

  • S6493-64: 0.8 mm pitch × 64 ch S6493-128: 0.4 mm pitch × 128 ch S6494-64: 1.6 mm pitch × 64 ch S6494-128: 0.8 mm pitch × 128 ch l Simultaneous integration by using a charge amplifier array l Sequential readout with a shift register l Integrated clamp circuit allows low noise and wide dynamic range l Two gain levels can be selected l Operates from single 5 V supply input l S6493 series: Long active area can be configured by use of multiple arrays phosphor screen type is also available for X-ray d.

📥 Download Datasheet

Datasheet preview – S6493

Datasheet Details

Part number S6493
Manufacturer Hamamatsu
File Size 317.36 KB
Description (S6493 - S6495) Photodiode
Datasheet download datasheet S6493 Datasheet
Additional preview pages of the S6493 datasheet.

📁 Similar Datasheet

  • S6400N - 35A Silicon Controlled Rectifier (Solid State)
  • S6401 - SiC Schottky Barrier Diode Bare Die (ROHM)
  • S6410N - 35A Silicon Controlled Rectifier (Solid State)
  • S6419 - Low Power Audio Amplifier (KODENSHI KOREA)
  • S6419P - Low Power Audio Amplifier (KODENSHI KOREA)
  • S642-X - Relay (Solid State Optronic)
  • S6420A - 35A Silicon Controlled Rectifier (Solid State)
  • S6420B - 35A Silicon Controlled Rectifier (Solid State)
  • S6420D - 35A Silicon Controlled Rectifier (Solid State)
  • S6420M - 35A Silicon Controlled Rectifier (Solid State)
Other Datasheets by Hamamatsu
  • S6494 - (S6493 - S6495) Photodiode
  • S6495 - (S6493 - S6495) Photodiode
  • S6431 - Si PIN photodiode
  • S6432 - Si PIN photodiode

Full PDF Text Transcription

Click to expand full text
PHOTODIODE www.DataSheet4U.com Photodiode array with amplifier S6493/S6494 series Photodiode arrays combined with a signal processing circuit chip S6493 and S6494 series are Si photodiode arrays efficiently combined with a signal processing circuit. The signal processing circuit is formed on a single chip by the CMOS process, and includes a shift register, clamp circuit, hold circuit and charge amplifier array, thus allowing a simplified external circuit configuration. The photocurrent from the photodiode array is fed to the charge amplifier connected to each element and is converted into a voltage. The signal voltage is then sent to the clamp circuit and hold circuit, and is finally read out from the shift register in turn as a sequential video signal.
Published: |