Datasheet4U Logo Datasheet4U.com

HT3085EA - Slew-Rate-Limited RS-485/RS-422 Transceivers

General Description

The HT3085 is low-power transceivers for RS-485 and RS-422 communication.

IC contains one driver and one receiver.

Key Features

  • Extended ESD Protection for RS-485/RS-422 I/OPins ±15kV Using Human Body Model.
  • Low Quiescent Current: 300µA DIP8.
  • 8 N SUFFIX HT3085EANZ.
  • -7V to +12V Common-Mode Input Voltage Range.
  • Three-State Outputs.
  • 30ns Propagation Delays, 5ns Skew.
  • Full-Duplex and Half-Duplex Versions Available SOP.
  • 8 R SUFFIX HT3085EARZ.
  • Operate from a Single 5V Supply.
  • Allows up to 32 Transceivers on the Bus.
  • Data rate: 2,5 Mbps MSOP.
  • 8 M SUFFIX H.

📥 Download Datasheet

Datasheet Details

Part number HT3085EA
Manufacturer HTCSEMI
File Size 414.84 KB
Description Slew-Rate-Limited RS-485/RS-422 Transceivers
Datasheet download datasheet HT3085EA Datasheet

Other Datasheets by HTCSEMI

Part Number Description
HT321V input/output rail-to-rail operational amplifiers
HT324V input/output rail-to-rail operational amplifiers
HT337A Negative Voltage Regulator
HT34118A Voice Switched Speakerphone Circuit
HT358A Low Power Dual Operational Amplifier
HT358V input/output rail-to-rail operational amplifiers
HT3605A 20V/5A Synchronous Buck Regulator
HT3914A Dot/Bar Display Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HT3085EA CMOS – Low-Power, Slew-Rate-Limited RS-485/RS-422 Transceivers GENERAL DESCRIPTION The HT3085 is low-power transceivers for RS-485 and RS-422 communication. IC contains one driver and one receiver. The driver slew rates of the HT3085 is not limited, allowing them to transmit up to 2.5Mbps.These transceivers draw between 120µA and 500µA of supply current when unloaded or fully loaded with disabled drivers. All parts operate from a single 5V supply. Drivers are short-circuit current limited and are protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into a high-impedance state.The receiver input has a fail-safe feature that guarantees a logic-high output if the input is open circuit.