Datasheet4U Logo Datasheet4U.com

GS1525 - HD-LINX II Voltage Controlled Oscillator

General Description

The GO1525 is a self contained, miniature Voltage Controlled Oscillator (VCO).

Key Features

  • generates 1.485GHz or 1.485/1.001GHz signal for HD-LINX™II ICs low current consumption 50Ω output impedance operates from a single 2.5V supply 8 pin tape on reel Pb-free and RoHS Compliant 1.485GHz reference clock signal for the GS1560 and GS9060 deserializers, and for the GS1532 and GS9062 serializers. The control voltage range is from 1.0 volts to 1.5 volts and is derived from the on-chip PLLs. The GO1525 frequency can be pulled appro.

📥 Download Datasheet

Datasheet Details

Part number GS1525
Manufacturer Gennum Corporation
File Size 217.84 KB
Description HD-LINX II Voltage Controlled Oscillator
Datasheet download datasheet GS1525 Datasheet

Other Datasheets by Gennum Corporation

Part Number Description
GS1522 HDTV Serial Digital Serializer
GS1524 HD-LINX-TM II Multi-Rate SDI Adaptive Cable Equalizer
GS1524A Adaptive Cable Equalizer
GS1528 HD-LINX-TM II Multi-Rate SDI Dual Slew-Rate Cable Driver
GS1528A HD-LINX-R II Multi-Rate Dual Slew-Rate Cable Driver
GS1500 HDTV Serial Digital Deformatter
GS1501 HDTV Serial Digital Formatter
GS1503 HD EMBEDDED AUDIO CODEC
GS1510 HDTV Serial Digital Deformatter
GS1511 HD-LINX -TM GS1511 HDTV Serial Digital Formatter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com GO1525 HD-LINX™II Voltage Controlled Oscillator GO1525 Data Sheet Key Features • • • • • • generates 1.485GHz or 1.485/1.001GHz signal for HD-LINX™II ICs low current consumption 50Ω output impedance operates from a single 2.5V supply 8 pin tape on reel Pb-free and RoHS Compliant 1.485GHz reference clock signal for the GS1560 and GS9060 deserializers, and for the GS1532 and GS9062 serializers. The control voltage range is from 1.0 volts to 1.5 volts and is derived from the on-chip PLLs. The GO1525 frequency can be pulled approximately 32MHz for every one volt of control. The output level is typically -9.0dBm with low spurious and noise content. It is designed to drive 50Ω strip lines. The VCO requires a single 2.5V supply and draws a maximum of 15mA of current.