GM2110
Description
- -
- Initial release Changed title from gm2120 to gm2110/20 Data Sheet In Figure 10, the remended ADC input termination resistance changed from 100 ohms to 20 ohms and 57.6 ohms for the RED+ and RED- signals respectively, as these values yield better performance Clarified that input formats with resolutions higher than that supported by the LCD panel are supported as recovery modes only in section 4.3.2 Corrected the shrink description in section 4.7.2 Added section 4.13.3
- ISP of FLASH ROM Devices Added section 4.13.4
- UART Interface. Added section 4.13.5
- DDC2Bi Interface Added gm2110 DC Characteristics to Table 18 & Table 19 in section 5.1 Added gm2110 ordering information in section 6
Date
Nov 2001 April 2002
- -
- -
- -
- D2120-DAT-01C
Pins 143 ~ 146: changed xxx_SDDS or xxxx_SDDS to xxx_DDDS or xxxx_DDDS respectively
- Pins 138 ~ 141: changed xxx_DDDS or xxxx_DDDS to xxx_SDDS or xxxx_SDDS respectively
- Pins 147 ~ 148: changed xxx_DPLL to xxx_RPLL
- June...
