GS81302D06E-500I Datasheet | GSI Technology

GS81302D06/11/20/38E-500/450/400/350 165-Bump BGA mercial Temp Industrial Temp 144Mb SigmaQuad-II+ Burst of 4 SRAM 500 MHz- 350 MHz 1.8 V VDD 1.8 V or 1.5 V I/O Features - 2.5 Clock Latency - Simultaneous Read and Write SigmaQuad™ Interface - JEDEC-standard pinout and package - Dual Double Data Rate interface - Byte Write controls sampled at data-in time - Burst of 4 Read and Write - On-Die Termination (ODT) on Data (D), Byte Write (BW), and Clock (K, K) intputs - 1.8 V +100/- 100 mV core power supply - 1.5 V or 1.8 V HSTL Interface - Pipelined read operation - Fully coherent read and write pipelines - ZQ pin for programmable output drive strength - Data Valid Pin (QVLD) Support - IEEE 1149.1 JTAG-pliant Boundary Scan - 165-bump, 15 mm x 17 mm, 1 mm bump pitch BGA package - RoHS-pliant 165-bump BGA package available SigmaQuad™ Family Overview The GS81302D06/11/20/38E are built in pliance with the SigmaQuad-II+ SRAM pinout standard for Separate I/O synchronous SRAMs. They are 150,994,944-bit (144Mb) SRAMs. The GS81302D06/11/20/38E SigmaQuad SRAMs are just one element in a family of low power, low voltage HSTL I/O SRAMs designed to operate at the speeds needed to implement economical high performance networking systems. Clocking and Addressing Schemes The GS81302D06/11/20/38E SigmaQuad-II+ SRAMs are synchronous devices. They employ two input register clock inputs, K and K. K and K are independent single-ended clock inputs, not differential inputs to a single differential clock input buffer. Each internal read and write operation in a SigmaQuad-II+ B4 RAM is four times wider than the device I/O bus. An input data bus de-multiplexer is used to accumulate ining data before it is simultaneously written to the memory array. An output data multiplexer is...