Datasheet4U Logo Datasheet4U.com

29LV160TE90TN - MBM29LV160TE90TN

Description

The MBM29LV160TE/BE is a 16M-bit, 3.0 V-only Flash memory organized as 2M bytes of 8 bits each or 1M words of 16 bits each.

The MBM29LV160TE/BE is offered in a 48-pin TSOP (I), 48-pin CSOP and 48-ball FBGA packages.

Features

  • a sector erase architecture. The sector mode allows each sector to be erased and reprogrammed without affecting other sectors. The MBM29LV160TE/BE is erased when shipped from the factory. The device features single 3.0 V power supply operation for both read and write functions. Internally generated and regulated voltages are provided for the program and erase operations. A low VCC detector automatically inhibits write operations on the loss of power. The end of program or erase is detected by Da.

📥 Download Datasheet

Datasheet preview – 29LV160TE90TN

Datasheet Details

Part number 29LV160TE90TN
Manufacturer Fujitsu Media Devices
File Size 704.11 KB
Description MBM29LV160TE90TN
Datasheet download datasheet 29LV160TE90TN Datasheet
Additional preview pages of the 29LV160TE90TN datasheet.

📁 Similar Datasheet

  • 29LV160B - 16 Megabit CMOS 3 Volt-only Sector Erase Flash Memory (AMD)
  • 29LV160BT - MX29LV160BT (Macronix International)
  • 29LV160C - 16M-BIT [2Mx8/1Mx16] CMOS SINGLE VOLTAGE 3V ONLY FLASH MEMORY (Macronix International)
  • 29LV160DB - AM29LV160DB (AMD)
  • 29LV160M - 16 Megabit 3 Volt-only Sector Erase Flash Memory (AMD)
  • 29LV1024 - AT29LV1024 (ATMEL Corporation)
  • 29LV008BTC - MX29LV008BTC (Macronix International)
  • 29LV010 - EN29LV010 (Eon Silicon Solution)
  • 29LV040B - AM29LV040B (Advanced Micro Devices)
  • 29LV256M - AM29LV256M (Advanced Micro Devices)
Other Datasheets by Fujitsu Media Devices

Full PDF Text Transcription

Click to expand full text
FUJITSU SEMICONDUCTOR DATA SHEET DS05-20883-2E FLASH MEMORY CMOS 16M (2M × 8/1M × 16) BIT MBM29LV160TE/BE -70/90/12 s GENERAL DESCRIPTION The MBM29LV160TE/BE is a 16M-bit, 3.0 V-only Flash memory organized as 2M bytes of 8 bits each or 1M words of 16 bits each. The MBM29LV160TE/BE is offered in a 48-pin TSOP (I), 48-pin CSOP and 48-ball FBGA packages. The device is designed to be programmed in-system with the standard system 3.0 V VCC supply. 12.0 V VPP and 5.0 V VCC are not required for write or erase operations. The device can also be reprogrammed in standard EPROM programmers. The standard MBM29LV160TE/BE offers access times of 70 ns, 90 ns and 120 ns, allowing operation of highspeed microprocessors without wait states.
Published: |