MC9S12A64
Description of Changes
Initial version based on MC9SDP256-2.09 Version. In table 7 I/O Characteristics" of the electrical characteristics replaced t PULSE with tpign and tpval in lines "Port ... Interrupt Input Pulse filtered" and "Port ... Interrupt Input Pulse passed" respectively. Table "Oscillator Characteristics": removed "Oscillator start-up time from POR or STOP" row Table "5V I/O Characteristics": Updated Partial Drive IOH = +- 2m A and Full Drive IOH =
- 10m A Table "ATD Operating Characteristics": Distinguish IREFfor 1 and 2 ATD blocks on Table "ATD Electrical Characteristics": Update CINS to 22 p F Table "Operating Conditions": Changed VDD and VDDPLL to 2.35 V (min) Removed Document number except from Cover Sheet Updated Table "Document References" Table "5V I/O Characteristics" : Corrected Input Capacitance to 6p F Section: "Device Pinout" (112-pin and 80-pin): added in diagrams RXCAN0 to PJ6 and TXCAN0 to PJ7 Table "PLL Characteristics": Updated parameters K1 and f1 Figure "Basic...
