Datasheet4U Logo Datasheet4U.com

NC7WB66 - TinyLogic. Low Voltage UHS Dual SPST Normally Open Bus Switch

Description

The FSA266 or NC7WB66 is an ultra high-speed (UHS) dual single-pole/single-throw (SPST) analog switch or 2-bit bus switch.

The device is fabricated with advanced sub-micron CMOS technology to achieve high speed enable and disable times and low On Resistance over a broad VCC range.

Features

  • O Useful in both analog and digital.

📥 Download Datasheet

Datasheet preview – NC7WB66

Datasheet Details

Part number NC7WB66
Manufacturer Fairchild
File Size 232.71 KB
Description TinyLogic. Low Voltage UHS Dual SPST Normally Open Bus Switch
Datasheet download datasheet NC7WB66 Datasheet
Additional preview pages of the NC7WB66 datasheet.

📁 Similar Datasheet

  • NC7WP04 - TinyLogic ULP Dual Inverter (Fairchild Semiconductor)
  • NC7WP08 - TinyLogic ULP-A Dual 2-Input AND Gate (ON Semiconductor)
  • NC7WP14 - TinyLogic ULP-A Dual Inverter (ON Semiconductor)
  • NC7WV04 - TinyLogic ULP-A Dual Inverter (ON Semiconductor)
  • NC7WV07 - TinyLogic ULP-A Dual Buffer (ON Semiconductor)
  • NC7WV16 - TinyLogic ULP-A Dual Buffer (ON Semiconductor)
  • NC7WV17 - TinyLogic ULP-A Dual Buffer (ON Semiconductor)
  • NC7WZ00 - TinyLogic UHS Dual 2-Input NAND Gate (ON Semiconductor)
  • NC7WZ02 - TinyLogic UHS Dual 2-Input NOR Gate (ON Semiconductor)
  • NC7WZ04 - TinyLogic UHS Dual Inverter (ON Semiconductor)
Other Datasheets by Fairchild

Full PDF Text Transcription

Click to expand full text
FSA266 • NC7WB66 Low Voltage Dual SPST Normally Open Analog Switch or 2-Bit Bus Switch May 2000 Revised December 2005 FSA266 • NC7WB66 Low Voltage Dual SPST Normally Open Analog Switch or 2-Bit Bus Switch General Description The FSA266 or NC7WB66 is an ultra high-speed (UHS) dual single-pole/single-throw (SPST) analog switch or 2-bit bus switch. The device is fabricated with advanced sub-micron CMOS technology to achieve high speed enable and disable times and low On Resistance over a broad VCC range. The device is specified to operate over the 1.65 to 5.5V VCC operating range. The device is organized as a dual switch with independent CMOS compatible switch enable (OE) controls. When OE is HIGH, the switch is ON and Port A is connected to Port B.
Published: |