Datasheet4U Logo Datasheet4U.com

QTLP652C-4 - SURFACE MOUNT LED LAMP STANDARD BRIGHT 1206 (Reverse Mount)

Description

These surface mount chip LEDs are designed to fit industry standard footprint.

They are reverse mountable and designed to emit light through a small cut-out hole in the PC board.

Features

  • Small footprint - 3.2(L) X 1.6(W) X 1.1(H) mm.
  • Wide viewing angle of 130°.
  • Water clear optics.
  • Moisture-proof packaging.
  • Available in 0.315" (8mm) width tape on 7" (178mm) diameter reel; 2,000 units per reel © 2003 Fairchild Semiconductor Corporation Page 1 of 7 2/12/03.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
QTLP670C-2 SMT LED LAMP PLCC-2 PACKAGE QT Optoelectronics
QTLP670C-3 SMT LED LAMP PLCC-2 PACKAGE QT Optoelectronics
QTLP670C-4 SMT LED LAMP PLCC-2 PACKAGE QT Optoelectronics
QTLP670C-7 SMT LED LAMP PLCC-2 PACKAGE QT Optoelectronics
QTLP282-2 SURFACE MOUNT LED LAMP FLAT TYPE QT Optoelectronics

Other Datasheets by Fairchild (onsemi)

Part Number Description
QTLP652C-2 SURFACE MOUNT LED LAMP STANDARD BRIGHT 1206 (Reverse Mount)
QTLP652C-3 SURFACE MOUNT LED LAMP STANDARD BRIGHT 1206 (Reverse Mount)
QTLP652C-7 SURFACE MOUNT LED LAMP STANDARD BRIGHT 1206 (Reverse Mount)
QTLP652C-AG SURFACE MOUNT LED LAMP SUPER BRIGHT 1206 (Reverse Mount)
QTLP652C-B SURFACE MOUNT LED LAMP STANDARD BRIGHT 1206 (Reverse Mount)

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SURFACE MOUNT LED LAMP STANDARD BRIGHT 1206 (Reverse Mount) QTLP652C-2 HER QTLP652C-7 AlGaAs Red PACKAGE DIMENSIONS 0.063 (1.6) QTLP652C-3 Yellow QTLP652C-B Blue QTLP652C-4 Green 0.063 (1.6) TOP 5° 0.043 (1.1) 0.126 (3.2) 0.012 (0.3) SIDE 0.079 (2.0) BOTTOM POLARITY MARK (See Note 2) + POLARITY for -2, -3, -4 and -B for -7 APPLICATIONS • Keypad backlighting • Push-button backlighting • LCD backlighting NOTE: 1. Dimensions for all drawings are in inches (mm). 2. Cathode for -2, -3, -4 and B. Anode for -7. DESCRIPTION These surface mount chip LEDs are designed to fit industry standard footprint. They are reverse mountable and designed to emit light through a small cut-out hole in the PC board. FEATURES • Small footprint - 3.2(L) X 1.6(W) X 1.
Published: |