Datasheet4U Logo Datasheet4U.com

FSTU16245 - 16-Bit Bus Switch with −2V Undershoot Protection

General Description

The Fairchild Switch FSTU16245 provides 16-bits of highspeed CMOS TTL-compatible bus switching.

The low On Resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise.

The device is organized as a 16-bit switch.

Key Features

  • I Undershoot hardened to.
  • 2V (A and B Ports) I 4Ω switch connection between two ports. I Minimal propagation delay through the switch. I Low lCC. I Zero bounce in flow-through mode. I Control inputs compatible with TTL level. I See.

📥 Download Datasheet

Other Datasheets by Fairchild (now onsemi)

Part Number Description
FSTU162450 Configurable 4-Bit to 20-Bit Bus Switch with .2V Undershoot Protection and 25 Series Resistors in Outputs (Preliminary)
FSTU16211 24-Bit Bus Switch with .2V Undershoot Protection (Preliminary)
FSTU162211 24-Bit Bus Switch with .2V Undershoot Protection and 25 Series Resistors in Outputs (Preliminary)
FSTU16861 20-Bit Bus Switch with −2V Undershoot Protection
FSTU16862 20-Bit Bus Switch with −2V Undershoot Protection
FSTU3125 4-Bit Bus Switch with −2V Undershoot Protection
FSTU32160 16-Bit to 32-Bit Multiplexer/Demultiplexer Bus Switch
FSTU32160A 16-Bit to 32-Bit Multiplexer/Demultiplexer Bus Switch
FSTU3253 Dual 4:1 Multiplexer/Demultiplexer Bus Switch
FSTU3257 Quad 2:1 Multiplexer/Demultiplexer Bus Switch with -2V Undershoot Protection

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
FSTU16245 16-Bit Bus Switch with −2V Undershoot Protection April 2001 Revised April 2001 FSTU16245 16-Bit Bus Switch with −2V Undershoot Protection General Description The Fairchild Switch FSTU16245 provides 16-bits of highspeed CMOS TTL-compatible bus switching. The low On Resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. The device is organized as a 16-bit switch. There are two 8-bit switches with separate output enable inputs. When OE is LOW, the switch is ON and Port a is connected to Port B. When OE is HIGH, the switch is OFF and a high impedance state exists between the A and B Ports. The A and B Ports are protected against undershoot to support an extended range to 2.0V below ground.