Datasheet4U Logo Datasheet4U.com

FST34170 - 17-Bit to 34-Bit Multiplexer/Demultiplexer Bus Switch

General Description

The Fairchild Switch FST34170 is a 17-bit to 34-bit highspeed CMOS TTL-compatible multiplexer/demultiplexer bus switch.

The low on resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise.

Key Features

  • s Slower Output Enable times prevent signal disruption s 4Ω switch connection between two ports. s Minimal propagation delay through the switch. s Low lCC. s Zero bounce in flow-through mode. s Control inputs compatible with TTL level. s See.

📥 Download Datasheet

Other Datasheets by Fairchild (now onsemi)

Part Number Description
FST34X2245 32-Bit Bus Switch
FST3125 Quad Bus Switch
FST3126 Quad Bus Switch
FST32211 40/48-Bit Bus Switch
FST32211G 40/48-Bit Bus Switch
FST32245QSC Octal Bus Switch with 25 Series Resistor in Outputs (Preliminary)
FST32245WM Octal Bus Switch with 25 Series Resistor in Outputs (Preliminary)
FST32253 Dual 4:1 Multiplexer/Demultiplexer Bus Switch with 25 Series Resistor in Outputs
FST32253M Dual 4:1 Multiplexer/Demultiplexer Bus Switch with 25 Series Resistor in Outputs
FST32253MTC Dual 4:1 Multiplexer/Demultiplexer Bus Switch with 25 Series Resistor in Outputs

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
FST34170 17-Bit to 34-Bit Multiplexer/Demultiplexer Bus Switch October 2000 Revised December 2000 FST34170 17-Bit to 34-Bit Multiplexer/Demultiplexer Bus Switch General Description The Fairchild Switch FST34170 is a 17-bit to 34-bit highspeed CMOS TTL-compatible multiplexer/demultiplexer bus switch. The low on resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. The device can be used in applications where two buses need to be addressed simultaneously. The FST34170 is designed so that the A Port demultiplexes into B1 or B2 or both. Two select (SEL1, SEL 2) inputs provide switch enable control.