Datasheet4U Logo Datasheet4U.com

FDMS2380 - Dual Integrated Solenoid Driver

General Description

The FDMS2380 is an intelligent low side driver with built in recirculation and demagnetization circuits designed specifically for driving inductive loads.

The inputs are CMOS compatible.

Key Features

  • 5A, 60V Load Clamp.
  • rDS(ON) = 30mΩ (Typ. ) Excitation path.
  • 6V to 26V Operation.
  • CMOS Compatible.
  • Soft Short Detection.
  • Thermal Shutdown.
  • Diagnostic Output.
  • Integrated Clamps.
  • Over-current Protection.
  • Open Load Detection.
  • Over-voltage Protection Pin 1 General.

📥 Download Datasheet

Other Datasheets by Fairchild (now onsemi)

Part Number Description
FDMS2502SDC N-Channel MOSFET
FDMS2504SDC N-Channel MOSFET
FDMS2506SDC N-Channel MOSFET
FDMS2508SDC N-Channel Power MOSFET
FDMS2510SDC N-Channel MOSFET
FDMS2572 N-Channel UltraFET Trench MOSFET
FDMS2672 N-Channel UltraFET Trench MOSFET
FDMS2734 N-Channel UltraFET Trench MOSFET
FDMS015N04B MOSFET
FDMS0300S MOSFET

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
FDMS2380 Dual Integrated Solenoid Driver August 2007 FDMS2380 Dual Integrated Solenoid Driver Features „ 5A, 60V Load Clamp „ rDS(ON) = 30mΩ (Typ.) Excitation path „ 6V to 26V Operation „ CMOS Compatible „ Soft Short Detection „ Thermal Shutdown „ Diagnostic Output „ Integrated Clamps „ Over-current Protection „ Open Load Detection „ Over-voltage Protection Pin 1 General Description The FDMS2380 is an intelligent low side driver with built in recirculation and demagnetization circuits designed specifically for driving inductive loads. The inputs are CMOS compatible. A separate diagnostic signal for each channel provides the system with an indication of the operation of the solenoid or the presence of a protection fault condition.