ABR-42022 Datasheet ML4833 220V Non-Dimming Ballast Design

Manufacturer: Fairchild (now onsemi)

ABR-42022 ml4833 220v non-dimming ballast design by Fairchild (now onsemi) - Datasheet Preview

Datasheet Details

Part number	ABR-42022
Manufacturer	Fairchild (now onsemi)
File Size	68.02 KB
Description	ML4833 220V Non-Dimming Ballast Design
Download	ABR-42022 Download (PDF)

General Description

This Application Brief exists as a supplement to Application Note 63.

When used with Application Note 63, this document contains all the necessary information to convert an ML4833 Evaluation Board into a low-cost, non-dimming 220V ballast.

This power factor corrected, 60W non-dimming ballast operates over a 187 to 253VRMS line, and is designed to power two series connected F32T8 lamps.

Overview

August 1997 Application Brief 42022 ML4833 220V Non-Dimming Ballast.

Key Features

of the dimming ballast, which include:.
0.99 minimum power factor Less than 10% THD Programmable starting sequence for low glow current and extended lamp life Greater than 92% efficiency All American On-chip thermal and lamp out detection circuitry Capsco Power down threshold for GFI or end of lamp life protection Future Active Inc. Digi-Key Corp. Premier Magnetics (800) 538-8587 (800) 723-5817, (408) 434-9599 (800) 344-4539 (714) 362-42.

More Datasheets from Fairchild (now onsemi)

Part Number	Description
ABR-42016	The Low Noise Characteristics of the ML6428