Datasheet4U Logo Datasheet4U.com

XRP7740 - Quad-Output Digital PWM Buck Controller

Description

The XRP7740 is a quad-output pulse-width modulated (PWM) step-down DC-DC controller with a built-in LDO for standby power and GPIOs.

The device provides a complete power management solution in one IC and is fully programmable via the included I2C serial interface.

Features

  • Four switching buck (step-down) controllers each with internal FET drivers. Two controllers (2 & 4) support loads up to 15A; two controllers (1 & 3) support load up to 5A.
  • 6.5V to 20V input voltage range.
  • no additional voltage rails required.
  • Output voltages programmable from 0.9V to 5.1V.
  • Up to 6 reconfigurable GPIO pins.
  • Fully programmable via I2C interface.
  • Independent Digital Pulse Width Modulator (DPWM) channels with five coefficient PID control.

📥 Download Datasheet

Datasheet preview – XRP7740

Datasheet Details

Part number XRP7740
Manufacturer Exar
File Size 1.01 MB
Description Quad-Output Digital PWM Buck Controller
Datasheet download datasheet XRP7740 Datasheet
Additional preview pages of the XRP7740 datasheet.
Other Datasheets by Exar

Full PDF Text Transcription

Click to expand full text
XRP7740 www.DataSheet4U.com Quad-Output Digital PWM Buck Controller Supporting high current loads September 2009 REV 1.1.0 KEY FEATURES ƒ Four switching buck (step-down) controllers each with internal FET drivers. Two controllers (2 & 4) support loads up to 15A; two controllers (1 & 3) support load up to 5A. ƒ 6.5V to 20V input voltage range – no additional voltage rails required ƒ Output voltages programmable from 0.9V to 5.1V ƒ Up to 6 reconfigurable GPIO pins ƒ Fully programmable via I2C interface ƒ Independent Digital Pulse Width Modulator (DPWM) channels with five coefficient PID control ƒ High Integration: elimination of external circuits and components required for compensation, parameter adjustment and interface ƒ Programmable DPWM frequency range (300 kHz to 1.
Published: |