SP26LV431 Datasheet PDF - Exar HIGH SPEED +3.3V QUAD RS-422 DIFFERENTIAL LINE DRIVER Specs

SP26LV431 - HIGH SPEED +3.3V QUAD RS-422 DIFFERENTIAL LINE DRIVER

Datasheet Summary

Description

The SP26LV431 is a quad differential line driver that meets the specifications of the EIA standard RS-422 serial protocol.

Features

Exar's BiCMOS process allowing low power operational characteristics of CMOS technology while meeting all of the demands of the RS-422 serial protocol over 60Mbps under load. The RS-422 protocol allows up to 10 receivers to be connected to a multipoint bus transmission line. The SP26LV431 features a driver enable control common to all four drivers that places the output pins in a high impedance state. Since the cabling can be as long as 4,000 feet, the RS-422 drivers of the SP26LV431 are equippe.

Datasheet Details

Part number	SP26LV431
Manufacturer	Exar
File Size	519.93 KB
Description	HIGH SPEED +3.3V QUAD RS-422 DIFFERENTIAL LINE DRIVER
Datasheet	SP26LV431 Datasheet
Additional preview pages of the SP26LV431 datasheet.

📁 Similar Datasheet

SP26LV431 - High Speed / +3.3V Quad RS-422 Differential Line Driver (Sipex)

SP26LV432 - High Speed / Low Power Quad RS-422 Differential Line Receiver (Sipex)

SP2638C - Constant current and constant voltage primary control power switch (SPMICRO)

SP2638D - constant current and constant voltage primary-side controlled power switch (SPMICRO)

SP2638F - Primary side control constant current / constant voltage AC / DC control circuit (Shenchuanghui Electronics)

SP2658E - Constant current and constant voltage primary control power switch (SPMICRO)

SP200 - +5V High-Speed RS-232 Transceivers with 0.1mF Capacitors (Sipex)

SP200F - (SP200F / SP250F) Rectifier Stacks (VMI)

SP200S - (SP200S / SP250S) Rectifier Stacks (VMI)

SP201 - Offline Current Mode PWM Controller (SPMICRO)

Full PDF Text Transcription

Click to expand full text

SP26LV431 HIGH SPEED +3.3V QUAD RS-422 DIFFERENTIAL LINE DRIVER JUNE 2011 REV. 1.1.1 GENERAL DESCRIPTION The SP26LV431 is a quad differential line driver that meets the specifications of the EIA standard RS-422 serial protocol. The SP26LV431 features Exar's BiCMOS process allowing low power operational characteristics of CMOS technology while meeting all of the demands of the RS-422 serial protocol over 60Mbps under load. The RS-422 protocol allows up to 10 receivers to be connected to a multipoint bus transmission line. The SP26LV431 features a driver enable control common to all four drivers that places the output pins in a high impedance state.

Published: Mar 24, 2017 |