Datasheet4U Logo Datasheet4U.com

XRT83VL38 - Short-Haul Transceiver

Description

The XRT83VL38 is a fully integrated Octal (eight channel) long-haul and short-haul line interface unit for T1 (1.544Mbps) 100, E1 (2.048Mbps) 75 or 120 or J1 110applications.

Features

  • as well as transmit driver short circuit detection and receive loss of signal monitoring. It supports internal impedance matching for 75 100 110 and 120 for both transmitter and receiver. In the absence of the power supply, the transmit outputs and receive inputs are tri-stated allowing for redundancy.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
XRT83VSH316 16-CHANNEL T1/E1/J1 SHORT-HAUL LINE INTERFACE UNIT MaxLinear
XRT83VSH38 8-CHANNEL T1/E1/J1 SHORT-HAUL LINE INTERFACE UNIT MaxLinear
XRT81L27 SEVEN CHANNEL E1 LINE INTERFACE UNIT Exar
XRT85L61 BITS (BUILDING INTEGRATED TIMING SUPPLY) CLOCK EXTRACTOR Exar
XRT86VL30 T1/E1/J1 BITS ELEMENT - HARDWARE MANUAL Exar

Other Datasheets by Exar (now MaxLinear)

Part Number Description
XRT83VSH28 8-CHANNEL E1 SHORT-HAUL LINE INTERFACE UNIT
XRT83VSH314 14-CHANNEL T1/E1/J1 SHORT-HAUL LINE INTERFACE UNIT
XRT83VSH316 16-CHANNEL T1/E1/J1 SHORT-HAUL LINE INTERFACE UNIT
XRT83VSH38 8-CHANNEL T1/E1/J1 SHORT-HAUL LINE INTERFACE UNIT
XRT83D10 SINGLE CHANNEL DS1/CEPT LINE INTERFACE UNIT

Full PDF Text Transcription

Click to expand full text
XRT83VL38 OCTAL T1/E1/J1 LH/SH TRANSCEIVER WITH CLOCK RECOVERY AND JITTER ATTENUATOR www.DataSheet4U.com APRIL 2009 REV. 1.0.0 GENERAL DESCRIPTION The XRT83VL38 is a fully integrated Octal (eight channel) long-haul and short-haul line interface unit for T1 (1.544Mbps) 100, E1 (2.048Mbps) 75 or 120 or J1 110applications. In long-haul applications the XRT83VL38 accepts signals that have been attenuated from 0 to 36dB at 772kHz in T1 mode (equivalent of 0 to 6000 feet of cable loss) or 0 to 43dB at 1024kHz in E1 mode. In T1 applications, the XRT83VL38 can generate five transmit pulse shapes to meet the short-haul Digital Cross-Connect (DSX-1) template requirements as well as for Channel Service Units (CSU) Line Build Out (LBO) filters of 0dB, -7.5dB -15dB and -22.
Published: |