Datasheet4U Logo Datasheet4U.com

XR16V2651 - HIGH PERFORMANCE DUART

Description

The XR16V26511 (V2651) is a high performance dual universal asynchronous receiver and transmitter (UART) with 32 byte TX and RX FIFOs.

The device operates from 2.25 to 3.6 volts with 5 Volt tolerant inputs and is pin-to-pin and software compatible to Exar’s XR16V2551 and XR16L2551.

Features

  • of selectable FIFO trigger level, automatic hardware (RTS/CTS) and software flow control, and a complete modem interface. An internal loopback capability allows system diagnostics. Independent programmable fractional baud rate generators are provided in each channel to select data rates up to 16 Mbps at 3.3 Volt and 4X sampling clock. The V2651 is available in 48pin TQFP and 32-pin QFN packages. NOTE: 1 Covered by U. S. Patent #5,649,122.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
XR16V598 2.25V TO 3.6V HIGH PERFORMANCE OCTAL UART Exar
XR16V698 2.25V TO 3.6V HIGH PERFORMANCE OCTAL UART Exar
XR16C450 Asynchronous Receiver and Transmitter Exar
XR16C452 Dual Universal Asynchronous Receiver and Transmitter Exar
XR16C854D 2.97V TO 5.5V QUAD UART Exar

Other Datasheets by Exar (now MaxLinear)

Part Number Description
XR16V2650 HIGH PERFORMANCE DUART
XR16V2652 HIGH PERFORMANCE DUART
XR16V2550 HIGH PERFORMANCE DUART
XR16V2551 HIGH PERFORMANCE DUART
XR16V2552 HIGH PERFORMANCE DUART

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com JUNE 2006 PRELIMINARY XR16V2651 REV. P1.0.0 HIGH PERFORMANCE DUART WITH 32-BYTE FIFO AND POWERSAVE GENERAL DESCRIPTION The XR16V26511 (V2651) is a high performance dual universal asynchronous receiver and transmitter (UART) with 32 byte TX and RX FIFOs. The device operates from 2.25 to 3.6 volts with 5 Volt tolerant inputs and is pin-to-pin and software compatible to Exar’s XR16V2551 and XR16L2551. The device includes 2 additional capabilities over the XR16V2650: Intel and Motorola data bus selection and a “PowerSave” mode to further reduce sleep current to a minimum during sleep mode. It supports the Exar’s enhanced features of selectable FIFO trigger level, automatic hardware (RTS/CTS) and software flow control, and a complete modem interface.
Published: |