Datasheet4U Logo Datasheet4U.com

XR16M781 - 1.62V TO 3.63V UART

Description

The XR16M7811 (M781) is an enhanced Universal Asynchronous Receiver and Transmitter (UART) with a VLIO bus interface and has 64 bytes of transmit and receive FIFOs, programmable transmit and receive FIFO trigger levels, automatic hardware and software flow control, and data rates of up to 20 Mbps at

Features

  • VLIO bus interface.
  • Pin-to-pin compatible with SC16C850V and SC16C850SV in 32-QFN package.
  • 20 Mbps maximum data rate.
  • Programmable TX/RX FIFO Trigger Levels.
  • TX/RX FIFO Level Counters.
  • Independent TX/RX Baud Rate Generator.
  • Fractional Baud Rate Generator.
  • Auto RTS/CTS Hardware Flow Control.
  • Auto XON/XOFF Software Flow Control.
  • Auto RS-485 Half-Duplex Direction Control.
  • Multidrop mode w/ Auto Add.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
XR16M554 1.62V To 3.63V Quad UART Sipex Corporation
XR16M554D 1.62V To 3.63V Quad UART Sipex Corporation
XR16M564 1.62V TO 3.63V Quad UART Sipex Corporation
XR16M564D 1.62V TO 3.63V Quad UART Sipex Corporation
XR16M570 1.62V TO 3.63V HIGH PERFORMANCE UART Exar

Other Datasheets by Exar (now MaxLinear)

Part Number Description
XR16M780 1.62V TO 3.63V HIGH PERFORMANCE UART
XR16M752 HIGH PERFORMANCE DUART
XR16M770 1.62V TO 3.63V HIGH PERFORMANCE UART
XR16M2550 HIGH PERFORMANCE LOW VOLTAGE DUART
XR16M2551 HIGH PERFORMANCE LOW VOLTAGE DUART

Full PDF Text Transcription

Click to expand full text
XR16M781 1.62V TO 3.63V UART WITH 64-BYTE FIFO AND VLIO INTERFACE AUGUST 2009 REV. 1.0.1 GENERAL DESCRIPTION The XR16M7811 (M781) is an enhanced Universal Asynchronous Receiver and Transmitter (UART) with a VLIO bus interface and has 64 bytes of transmit and receive FIFOs, programmable transmit and receive FIFO trigger levels, automatic hardware and software flow control, and data rates of up to 20 Mbps at 3.3V, 16 Mbps at 2.5V and 10 Mbps at 1.8V with 4X data sampling rate. The Auto RS-485 Half-Duplex Direction control feature simplifies both the hardware and software for half-duplex RS-485 applications. In addition, the Multidrop mode with Auto Address detection increases the performance by simplifying the software routines.
Published: |