EN25Q128
FEATURES
- Single power supply operation
- Full voltage range: 2.7-3.6 volt
- Serial Interface Architecture
- SPI patible: Mode 0 and Mode 3
- 128 M-bit Serial Flash
- 128 M-bit/16,384 K-byte/65,536 pages
- 256 bytes per programmable page
- Standard, Dual or Quad SPI
- Standard SPI: CLK, CS#, DI, DO, WP#
- Dual SPI: CLK, CS#, DQ0, DQ1, WP#
- Quad SPI: CLK, CS#, DQ0, DQ1, DQ2, DQ3
- High performance
- 104MHz clock rate for Standard SPI
- 80MHz clock rate for two data bits
- 80MHz clock rate for four data bits
- Low power consumption
- 12 m A typical active current
- 1 μA typical power down current
- Uniform Sector Architecture:
- 4096 sectors of 4-Kbyte
- 256 blocks of 64-Kbyte
- Any sector or block can be erased individually
- Software and Hardware Write Protection:
- Write Protect all or portion of memory via software
- Enable/Disable protection with WP# pin
- High performance program/erase speed
- Page program time: 0.8ms typical
- Sector erase time: 50ms typical
- Block erase time...
