EN25P05
FEATURES
- Single power supply operation
- Full voltage range: 2.7-3.6 volt
- 512 Kbit Serial Flash
- 512 K-bit/64 K-byte/256 pages
- 256 bytes per programmable page
- High performance
- 75MHz clock rate
- Low power consumption
- 5 m A typical active current
- 1 μA typical power down current
- Uniform Sector Architecture:
- Two 32-Kbyte sectors
- Software and Hardware Write Protection:
- Write Protect all or portion of memory via software
- Enable/Disable protection with WP# pin
- High performance program/erase speed Byte program time: 8µs typical Page program time: 1.5ms typical Sector erase time: 500ms typical Chip erase time: 1 Seconds typical
- Minimum 100K endurance cycle
- Package Options 8 pins SOP 150mil body width 8 contact VDFN All Pb-free packages are Ro HS pliant
- mercial and industrial temperature Range
GENERAL DESCRIPTION
The EN25P05 is a 512 K-bit (64K-byte) Serial Flash memory, with advanced write protection mechanisms, accessed by a high speed SPI-patible bus. The...
