Datasheet4U Logo Datasheet4U.com

RSM84510 - PS/2 Scrolling Mouse Controller

Description

The RSM84510 Scrolling Mouse Controller is specially designed to control PS/2 mouse device.

This single chip can interface three key-switches four photo-couples plus z-axis direct to 8042 controller.

Features

  • ¡¤ ¡¤ ¡¤ ¡¤ ¡¤ ¡¤ ¡¤ ¡¤ Using 51k¡À 5% resistor for RC oscillation. Compatible with legacy PS/2 mouse. Compatible with Microsoft scrolling mouse. Built-in noise immunity circuit. Built-in current comparator for photo-couples input. Built-in three step dynamic input impedance. Three key-switches and four photo-couples inputs. Six types Z direction input: www. DataSheet4U. com ¡¤ ¡¤ ¡¤ ¡¤ 4.Mechanical input. (Z/1) 1.Photo couples input. (Z/1) 5.Photo couples input. (Z/4) 2.Key-switches input. 6.Mech.

📥 Download Datasheet

Datasheet Details

Part number RSM84510
Manufacturer Unknown Manufacturer
File Size 671.25 KB
Description PS/2 Scrolling Mouse Controller
Datasheet download datasheet RSM84510 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
RSM002N06 Nch 60V 250mA Small Signal MOSFET Rohm
RSM002P03 4V Drive Pch MOS FET Rohm
RSM12C Compact Non-contact angle sensor TOCOS
RSM1xxx (RS Series) Metal Oxide Resistors Stackpole Electronics
RSM200S SURFACE MOUNT TUNING FORK CRYSTAL UNIT Raltron Electronics

Other Datasheets by Unknown Manufacturer

Part Number Description
RSM8196 Dual-channel remote control car receiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com RSM84510 PS/2 SCROLLING MOUSE CONTROLLER GENERAL DESCRIPTION The RSM84510 Scrolling Mouse Controller is specially designed to control PS/2 mouse device. This single chip can interface three key-switches four photo-couples plus z-axis direct to 8042 controller. RSM84510 can receive command and echo status or data format which are compatible with IBM PS/2 mode mouse. Key debouncing circuit is provided to prevent false entry and improve the accuracy. In the traditional mouse, a great number of noises are generated when the grid is partially closed or opened. These noises are usually mistaken for movement signals by traditional mouse controller and the cursor of the display screen is thus moved frequently up and down or back and forth.
Published: |