M14D1G1664A-1.5BG2P Datasheet | Elite Semiconductor Microelectronics Technology

Features - JEDEC Standard - VDD = 1.8V ± 0.1V, VDDQ = 1.8V ± 0.1V - Internal pipelined double-data-rate architecture; two data access per clock cycle - Bi-directional differential data strobe (DQS, DQS ); DQS can be disabled for single-ended data strobe operation. - On-chip DLL - Differential clock inputs (CLK and CLK ) - DLL aligns DQ and DQS transition with CLK transition - 8 bank operation - CAS Latency : 3, 4, 5, 6, 7 - Additive Latency: 0, 1, 2, 3, 4, 5, 6 - Burst Type : Sequential and Interleave - Burst Length : 4, 8 - All inputs except data & DM are sampled at the rising edge of the system clock(CLK) - Data I/O transitions on both edges of data strobe (DQS) - DQS is edge-aligned with data for READ; center-aligned with data for WRITE - Data mask (DM) for write masking only - Off-Chip-Driver (OCD) impedance adjustment - On-Die-Termination for better signal quality - Special function support - 50/ 75/ 150 ohm ODT - High Temperature Self refresh rate enable - Duty Cycle Corrector -...