Datasheet4U Logo Datasheet4U.com

ZXLD1615Q - AUTOMOTIVE COMPLIANT HIGH LCD BIAS GENERATOR BOOST CONVERTER

Description

The ZXLD1615Q is a PFM inductive-boost-converter designed to provide output voltages of up to 28V from a 2.5V to 5.5V input supply.

The ZXLD1615Q includes the output switch and peak current sense resistor, and can provide up to 10mA output current at maximum output voltage.

Features

  • Internal PWM Filter for Adjustable Output.
  • High Efficiency (85% typ. ).
  • Wide Input Voltage Range: 2.5V to 5.5V.
  • Up to 250mA Output Current at 5V.
  • Low 60µA Quiescent Current.
  • 100nA Maximum Shutdown Current.
  • Up to 1MHz Switching Frequency.
  • Low External Component Count.
  • Green Molding in Small Package TSOT25.
  • Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2).
  • Halogen and Antimony Free. “Green” Device (Note 3).
  • Automotive-Compliant.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ZXLD1615 ADJUSTABLE DC-DC BOOST CONVERTER Zetex Semiconductors
ZXLD1601 ADJUSTABLE DC-DC BOOST CONVERTER Zetex Semiconductors
ZXLD1100 ADJUSTABLE LED DRIVER Zetex
ZXLD1101 ADJUSTABLE LED DRIVER Zetex
ZXLD1320 Buck mode DC-DC converter Zetex Semiconductors

Other Datasheets by Diodes Incorporated

Part Number Description
ZXLD1350 30V 350mA LED DRIVER
ZXLD1350Q AUTOMOTIVE GRADE 350mA BUCK LED DRIVER
ZXLD1356Q AUTOMOTIVE GRADE 60V 550mA LED DRIVER
ZXLD1360 30V 1A LED DRIVER
ZXLD1360Q AUTOMOTIVE GRADE 30V 1A LED DRIVER

Full PDF Text Transcription

Click to expand full text
ZXLD1615Q AUTOMOTIVE COMPLIANT LCD BIAS GENERATOR BOOST CONVERTER Description The ZXLD1615Q is a PFM inductive-boost-converter designed to provide output voltages of up to 28V from a 2.5V to 5.5V input supply. The ZXLD1615Q includes the output switch and peak current sense resistor, and can provide up to 10mA output current at maximum output voltage. Higher current is available at lower output voltages. Quiescent current is typically 60A and a shutdown function is provided to reduce this current to less. Nominal output voltage can be set up to a maximum of 28V by two external resistors and can be adjusted to lower values by a PWM control signal applied to the 'Enable' pin. Depending upon the control frequency, the PWM signal will provide either continuous (low ripple) or gated control.
Published: |