Datasheet4U Logo Datasheet4U.com

AP43331N - QUICK CHARGER CONTROLLER COMPATIBLE

General Description

The AP43331N is a highly integrated secondary side constant voltage (CV) and constant current (CC) controller, which is compatible with Qualcomm Quick Charge 3.0 (QC 3.0) High Voltage Dedicated Charging Port (HVDCP) Class A specification.

Key Features

  • Constant Voltage and Constant Current Regulation.
  • Supporting Qualcomm QC 3.0 Class A (3.6V Up to 12V).
  • Output Cable Voltage Compensation.
  • High Precision CV/CC References.
  • Fast Dynamic Response.
  • Removing the Need for a Shunt Regulator Such As TL431.
  • Output Capacitor Safe.
  • Discharge Circuitry At the Output Voltage Switched Down.
  • Output Over Voltage Protection (OVP).
  • Output Under Voltage Protection (UVP).
  • Operating Supply Voltage: 3.2V to 1.

📥 Download Datasheet

Other Datasheets by Diodes Incorporated

Part Number Description
AP4305 CONSTANT VOLTAGE AND CONSTANT CURRENT CONTROLLER
AP4306 CONSTANT VOLTAGE AND CONSTANT CURRENT CONTROLLER
AP4310A DUAL OP AMP AND VOLTAGE REFERENCE
AP4310E DUAL OP AMP AND VOLTAGE REFERENCE
AP4312Q CONSTANT VOLTAGE AND CONSTANT CURRENT CONTROLLER
AP4313 CONSTANT VOLTAGE AND CONSTANT CURRENT CONTROLLER
AP431I LOW CATHODE CUREENT ADJUSTABLE PRECISION SHUNT REGULATOR
AP431S LOW CATHODE CURRENT ADJUSTABLE PRECISION SHUNT REGULATOR
AP431SH LOW CATHODE CURRENT ADJUSTABLE PRECISION SHUNT REGULATOR
AP4320 CONSTANT VOLTAGE AND CONSTANT CURRENT CONTROLLER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NEW PRODUCT AP43331N QUICK CHARGER CONTROLLER COMPATIBLE WITH QUALCOMM QC3.0 Description The AP43331N is a highly integrated secondary side constant voltage (CV) and constant current (CC) controller, which is compatible with Qualcomm Quick Charge 3.0 (QC 3.0) High Voltage Dedicated Charging Port (HVDCP) Class A specification. Pin Assignments (Top View) The AP43331N allows for selection of the output voltage of an AC−DC USB charger based on commands from the Portable Device (PD) being powered. Selecting a higher charging voltage will reduce the charging current for a given power level resulting in reduced IR drops and increased system efficiency. The USB−bus voltage can be controlled in discreet steps (QC 3.0’s step is 0.2V).