Datasheet4U Logo Datasheet4U.com

AP2202 - 150mA RF ULDO REGULATOR

General Description

The DIODES™ AP2202 is a 150mA ULDO regulator which provides very low noise, ultra-low dropout voltage (typically 165mV at 150mA), very low standby current (1µA maximum), and excellent power supply ripple rejection (PSRR 75dB at 100Hz).

Key Features

  • logic-compatible enable/shutdown control inputs, a low power shutdown mode for extended battery life, overcurrent protection, over temperature protection, and reversed current protection. Pin Assignments (Top View) (Top View) VIN 1 5 VOUT VIN 1 5 VOUT GND 2 GND 2 EN 3 4 BYP EN 3 4 ADJ (Top View) SOT-23-5 (Top View) The AP2202 has adjustable 2.5V, 2.6V, 2.8V, 3.0V, and 3.3V versions. The AP2202 is available in the space-saving SOT-23-5 and SOT-89 packages. 1 2 3 VOUT GND VIN (.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AP2202 RF ULDO REGULATOR BCD Semiconductor
AP2201 RF ULDO REGULATOR BCD Semiconductor
AP2201 PFM Control Step-Up Switching Regulator Chipown
AP2203 RF ULDO REGULATOR BCD Semiconductor
AP2204 WIDE INPUT VOLTAGE RANGE 150mA ULDO REGULATOR BCD Semiconductor

Other Datasheets by Diodes Incorporated

Part Number Description
AP220309 4A LOAD SWITCH
AP2204 150mA ULDO REGULATOR
AP2205 200mA ULDO REGULATOR
AP2210 300mA RF ULDO REGULATOR
AP221448 2.5A LOAD SWITCH

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AP2202 150mA RF ULDO REGULATOR Description The DIODES™ AP2202 is a 150mA ULDO regulator which provides very low noise, ultra-low dropout voltage (typically 165mV at 150mA), very low standby current (1µA maximum), and excellent power supply ripple rejection (PSRR 75dB at 100Hz). This device is used in batterypowered applications, such as handsets and PDAs; and in noisesensitive applications, such as RF electronics. The AP2202 also features logic-compatible enable/shutdown control inputs, a low power shutdown mode for extended battery life, overcurrent protection, over temperature protection, and reversed current protection.