Datasheet4U Logo Datasheet4U.com

NC12S0A0H06 - DC/DC Power Modul

This page provides the datasheet information for the NC12S0A0H06, a member of the NC12S0A0V06 DC/DC Power Modul family.

Description

The ENABLE (on/off) input allows external circuitry to put the NC converter into a low power dissipation (sleep) mode.

Positive (active-high) ENABLE is available as standard.

Positive ENABLE (active-high) units of the NC series are turned on if the ENABLE pin is high or floating.

Features

  • High Efficiency: 91% @ 12Vin, 5V/6A out Size: 30.5x15.5x11.7mm (1.20”×0.61”×0.46”) -- Vertical 30.5x15.5x12.3mm (1.20”×0.61”×0.48”) -- Horizontal Voltage and resistor-based trim No minimum load required Output voltage programmable from 0.9Vdc to 5.0Vdc via external resistors Fixed frequency operation Input UVLO, output, OCP, SCP Power good output signal Remote ON/OFF ISO 9001, TL 9000, ISO 14001, QS9000, OHSAS 18001 certified manufacturing facility UL/cUL 60950 (US & Canada) Recognized, and TUV.

📥 Download Datasheet

Datasheet preview – NC12S0A0H06

Datasheet Details

Part number NC12S0A0H06
Manufacturer Delta Electronics
File Size 644.31 KB
Description DC/DC Power Modul
Datasheet download datasheet NC12S0A0H06 Datasheet
Additional preview pages of the NC12S0A0H06 datasheet.

📁 Similar Datasheet

  • NC101 - Noise Diodes (Wireless Telecom)
  • NC101 - (NC100 Series) 0.1 HZ - 500 KHZ Noise Diode (Noise Com)
  • NC102 - Noise Diodes (Wireless Telecom)
  • NC102 - (NC100 Series) 0.1 HZ - 500 KHZ Noise Diode (Noise Com)
  • NC103 - Noise Diodes (Wireless Telecom)
  • NC103 - (NC100 Series) 0.1 HZ - 500 KHZ Noise Diode (Noise Com)
  • NC104 - Noise Diodes (Wireless Telecom)
  • NC104 - (NC100 Series) 0.1 HZ - 500 KHZ Noise Diode (Noise Com)
  • NC15 - 1.5 X 5mm / 2 X 6mm / 3 X 8mm Thru-hole (Fox Electronics)
  • NC1602L - Display (Newtec)
Other Datasheets by Delta Electronics

Full PDF Text Transcription

Click to expand full text
FEATURES High Efficiency: 91% @ 12Vin, 5V/6A out Size: 30.5x15.5x11.7mm (1.20”×0.61”×0.46”) -- Vertical 30.5x15.5x12.3mm (1.20”×0.61”×0.48”) -- Horizontal Voltage and resistor-based trim No minimum load required Output voltage programmable from 0.9Vdc to 5.0Vdc via external resistors Fixed frequency operation Input UVLO, output, OCP, SCP Power good output signal Remote ON/OFF ISO 9001, TL 9000, ISO 14001, QS9000, OHSAS 18001 certified manufacturing facility UL/cUL 60950 (US & Canada) Recognized, and TUV (EN60950) Certified Delphi NC06 Series Non-Isolated Point of Load DC/DC Power Modules: 12Vin, 0.9V~5.0Vout, 6A www.DataSheet4U.
Published: |