Datasheet4U Logo Datasheet4U.com

DIO3222 - USB2.0 Hi-Speed Switch

General Description

The DIO3222 is a low power, dual SPDT 2-port high-speed analog switch.

It handles bi-directional signal flow and is optimized for switching a hi-speed (480Mbps) source or a full-speed (12Mbps) source.

Key Features

  • VCC operation at 2.7V to 4.2V Low Con: 6.5pF Typical Low Ron: 6Ω Typical Low Power Consumption: 1µA Maximum Low ICCT : 15µA Maximum @VIN=1.8V, VCC=3.6V -3dB Bandwidth: > 720MHz Packaged in Pb-free DQFN-10; MSOP-10 and QFN-10 8kV HBM ESD Rating 2kV CDM ESD Rating Power-Off/On Protection on Common port. D+/D- Pins Tolerate up to 5.25V.

📥 Download Datasheet

Datasheet Details

Part number DIO3222
Manufacturer DIOO MICROCIRCUITS
File Size 334.29 KB
Description USB2.0 Hi-Speed Switch
Datasheet download datasheet DIO3222 Datasheet

Other Datasheets by DIOO MICROCIRCUITS

Part Number Description
DIO3303 3:1 USB 2.0 High-Speed USB Switch
DIO3581 Rail-to-Rail I/O CMOS Amplifier
DIO3712 High-bandwidth and Low on-resistance Analog switch
DIO1159B Low THD Analog Switch
DIO1280 Over-Voltage Protection Load Switch
DIO1500 Four-pole single-throw (4PST) Depletion Mode Isolation Switch
DIO20721 RRIO 10MHz Amplifier
DIO20721D RRIO 10MHz Amplifier
DIO20722 RRIO 10MHz Amplifier
DIO20724 RRIO 10MHz Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DIO3222 November 2010 DIO3222 Low-Power, USB2.0 Hi-Speed Switch Features VCC operation at 2.7V to 4.2V Low Con: 6.5pF Typical Low Ron: 6Ω Typical Low Power Consumption: 1µA Maximum Low ICCT : 15µA Maximum @VIN=1.8V, VCC=3.6V -3dB Bandwidth: > 720MHz Packaged in Pb-free DQFN-10; MSOP-10 and QFN-10 8kV HBM ESD Rating 2kV CDM ESD Rating Power-Off/On Protection on Common port. D+/D- Pins Tolerate up to 5.25V Description The DIO3222 is a low power, dual SPDT 2-port high-speed analog switch. It handles bi-directional signal flow and is optimized for switching a hi-speed (480Mbps) source or a full-speed (12Mbps) source. DIO3222 has high channel-to-channel noise isolation and low bit-to-bit skew which allows it to pass high-speed differential signals with good signal integrity.