Datasheet4U Logo Datasheet4U.com

CMG1 - USB Type-C EMCA Controller

Description

EZ-PD™ CMG1 is a dedicated USB Type-C EMCA controller that complies with the USB Type-C and Power Delivery (PD) standards for Electronically Marked Type-C Thunderbolt and non-Thunderbolt passive cable applications.

Features

  • Type-C Support and USB-PD Support.
  • Supports USB PD3.0 spec and USB Type-C spec version 1.3 (Including support for the revised minimum VCONN operating voltage of 3 V).
  • Integrated high-voltage protection on CC, VCONN1, and VCONN2 pins to protect against accidental shorts to the VBUS pin on the Type-C connector.
  • 40-byte storage programmable over Type-C interface for storing vendor-, device-, and cable-specific configuration data.
  • Termination resistor RA on VCONN1 and VCONN2.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer

Other Datasheets by Cypress (Infineon)

Part Number Description

Full PDF Text Transcription

Click to expand full text
EZ-PD™ CMG1 Datasheet USB Type-C EMCA Controller General Description EZ-PD™ CMG1 is a dedicated USB Type-C EMCA controller that complies with the USB Type-C and Power Delivery (PD) standards for Electronically Marked Type-C Thunderbolt and non-Thunderbolt passive cable applications. EZ-PD CMG1 integrates a complete Type-C transceiver including the RA termination resistors on the VCONN pins and VBUS short circuit protection on both VCONN and CC pins. CMG1 also includes 40 bytes of storage for configuration of vendor-, device-, and cable-specific configuration data. EZ-PD CMG1 is targeted for passive EMCA implementations with either one or two e-marker chips on the cable. Features Type-C Support and USB-PD Support ■ Supports USB PD3.0 spec and USB Type-C spec version 1.
Published: |