CMD274P4 - 2-20 GHz Low Phase Noise Amplifier

General Description

The CMD274P4 is a wideband GaAs MMIC low phase noise amplifier housed in a leadless surface mount package that is ideally suited for military, space and communications systems.

At 10 GHz the device delivers 17 dB of gain, a saturated output power of +22 dBm and a noise figure of 3.2 dB.

Key Features

Ultra wideband performance.
Low phase noise.
Low current consumption.
Pb-free RoHs compliant 4x4 mm QFN package Functional Block Diagram.

📥 Download Datasheet

CMD274P4 2-20 ghz low phase noise amplifier by Custom MMIC - Datasheet Preview

Datasheet Details

Part number	CMD274P4
Manufacturer	Custom MMIC
File Size	601.29 KB
Description	2-20 GHz Low Phase Noise Amplifier
Datasheet	CMD274P4 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
CMD274P4	Low Phase Noise Amplifier	Qorvo

Other Datasheets by Custom MMIC

Part Number	Description
CMD270	4-8 GHz Low Noise Amplifier
CMD270P3	4-8 GHz Low Noise Amplifier
CMD272P3	DC-10 GHz DPDT Transfer Switch
CMD273P3	DC-12 GHz DPDT Transfer Switch
CMD276C4	GaN Low Noise Amplifier
CMD277C4	5-7 GHz GaN Low Noise Amplifier
CMD279	2-30 GHz 5-bit Digital Attenuator
CMD201P5	DC-20 GHz Distributed Power Amplifier
CMD213	30-40 GHz Active Frequency Doubler
CMD214	24-36 GHz Active Frequency Doubler

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

CMD274P4 2-20 GHz Low Phase Noise Amplifier Features ► Ultra wideband performance ► Low phase noise ► Low current consumption ► Pb-free RoHs compliant 4x4 mm QFN package Functional Block Diagram Description The CMD274P4 is a wideband GaAs MMIC low phase noise amplifier housed in a leadless surface mount package that is ideally suited for military, space and communications systems. At 10 GHz the device delivers 17 dB of gain, a saturated output power of +22 dBm and a noise figure of 3.2 dB. Also with an input signal of 10 GHz the amplifier provides low phase noise performance of -165 dBc/Hz at 10 kHz offset. The CMD274P4 is a 50 ohm matched design which eliminates the need for external DC blocks and RF port matching. Electrical Performance – Vdd = 5.0 V, Vgg = 3.