HS2105SSE Datasheet PDF - Chiprise Unipolar Hall EffectiveSensor Specs

HS2105SSE - Unipolar Hall EffectiveSensor

This page provides the datasheet information for the HS2105SSE, a member of the HS2105 Unipolar Hall EffectiveSensor family.

Datasheet Summary

Description

The HS2105 device is a low-power digital switch Unipolar Hall effect sensor, designed for the most compact and battery-sensitive systems.

The total power consumption in normal operation is typically 2μW with a 1.8V power source.

Features

CMOS Hall IC Technology.
Strong RF noise protection.
1.8 to 5.5V for battery-powered.

Datasheet Details

Part number	HS2105SSE
Manufacturer	Chiprise
File Size	631.47 KB
Description	Unipolar Hall EffectiveSensor
Datasheet	HS2105SSE Datasheet
Additional preview pages of the HS2105SSE datasheet.

📁 Similar Datasheet

HS2108 - DC / DC Boost Converter (Hang Shun)

HS2-2520RH-Q - Radiation Hardened Uncompensated/ High Slew Rate Operational Amplifier (Intersil Corporation)

HS2-2620RH-Q - Radiation Hardened/ Very Wideband/ High Input Impedance Uncompensated Operational Amplifiers (Intersil Corporation)

HS2-2622RH-Q - Radiation Hardened/ Very Wideband/ High Input Impedance Uncompensated Operational Amplifiers (Intersil Corporation)

HS2-2700RH-Q - Low Power/ High Performance Radiation Hardened Operational Amplifier (Intersil Corporation)

HS2-3530ARH - Radiation Hardened Programmable Low Power Op Amp (Intersil Corporation)

HS2-3530ARH-8 - Radiation Hardened Programmable Low Power Op Amp (Intersil Corporation)

HS2-3530ARH-Q - Radiation Hardened Programmable Low Power Op Amp (Intersil Corporation)

HS2-3530RH - Low Power/ Radiation Hardened Programmable Operational Amplifier (Intersil Corporation)

HS2-3530RH-8 - Low Power/ Radiation Hardened Programmable Operational Amplifier (Intersil Corporation)

Full PDF Text Transcription

Click to expand full text

HS2105 Low-Power、Unipolar Hall Effective Sensor GENERAL DESCRIPTION The HS2105 device is a low-power digital switch Unipolar Hall effect sensor, designed for the most compact and battery-sensitive systems. The total power consumption in normal operation is typically 2μW with a 1.8V power source. North pole or South pole of sufficient strength will turn the output on. The output will be turned off under no magnetic field. While the magnetic flux density B is larger than operating point BOP, the output will be turned on (low), the output is held until B is lower than release point BRP, and then turned off. By incorporating an internal oscillator, the device samples the magnetic field and updates the output at a rate of low frequency for the lowest current consumption.

Published: Sep 17, 2024 |