Datasheet4U Logo Datasheet4U.com

CP2133 - High Efficiency 1X/1.5X Fractional Charge Pump

Features

  • z z z z z z z Drives up to 4 LEDs at 30 mA Each Regulated Output Current With 0.5% Matching Over Temperature LED Brightness Control Through PWM Control Signal（0Hz～50KHz） Low Input Ripple and Low EMI Over-current and Over-temperature Protected Less than 0.1μA Quiescent Current In Shutdown Mode RoHS Compliant and 100% Lead (Pb)-Free Pin Diagram (Top View) C2+ C1+ C212 11 10 VIN 9 C1- 13 8 VOUT PGND D1 D2 GND EN1 EN2 14 7 CP2133 15 6 16 5 1 2 3 Copyright ©2005 Chiphomer Technology.

📥 Download Datasheet

Datasheet Details

Part number CP2133
Manufacturer Chiphomer
File Size 108.33 KB
Description High Efficiency 1X/1.5X Fractional Charge Pump
Datasheet download datasheet CP2133 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CP2130 High Efficiency 1x/1.5x Fractional Charge Pump CHIP
CP2130 SINGLE-CHIP USB-TO-SPI BRIDGE Silicon Laboratories
CP2137 4-Channel LED Driver CHIP
CP2139 3-Channel Low-Dropout Constant-Current Parallel LED Driver CHIP
CP2100 TRANSHIELLD CP2000 SERIES ETC

Other Datasheets by Chiphomer

Part Number Description

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com Product Brief CP2133 DC/DC Series High Efficiency 1X/1.5X Fractional Charge Pump for White LED OVERVIEW The CP2133 is optimized for white LED supplies in backlight color display applications. The device provides a constant current, set by an external resistor, for each LED. The supply voltage ranges from 2.7 V to 5.5 V and is ideally suited for all applications powered by a single LI-Ion battery cell or three to four NiCd, NiMH, or Alkaline 3mm*3mm QFN 16L -40℃～85℃ battery cells. The CP2133 provides up to 30 mA per LED, for a total of 120 mA, for input voltage rang from 3 V to 5.5 V. High efficiency is achieved by utilizing a 1x/1.5x adaptive fractional conversion technique in combination with very low dropout current sources.
Published: |