HS517R - Omnipolar CMOS Output Hall Effect Switch

Datasheet Summary

Description

The HS517R Omnipolar Hall effect sensor IC is fabricated from mixed signal CMOS technology.

It incorporates advanced chopper-stabilization techniques to provide accurate and stable magnetic switch points.

ChipSourceTek

📥 Download Datasheet

Datasheet Details

Part number	HS517R
Manufacturer	ChipSourceTek
File Size	2.32 MB
Description	Omnipolar CMOS Output Hall Effect Switch
Datasheet	HS517R Datasheet
Additional preview pages of the HS517R datasheet.

📁 Similar Datasheet

HS510 - Thyristor - SCR (Silicon-Controlled Rectifier) (Hind Rectifiers Ltd)
HS5104 - Infrared remote controller (HuaXin)
HS5104 - Infrared Remote Control Encoder Transmitter (HAOHAI)
HS5131 - 8 Bit / 2.5uS ADC (Sipex Corp)
HS5150 - High Speed 8-Bit ADC (Hybrid Systems Corp)
HS5151 - Thick Film Chip Resistors (Stackpole Electronics Inc)
HS50N06 - N-channel MOSFET (HOMSEMI)
HS50N06DA - N-channel 60V MOSFET (HOMSEMI)
HS50N06PA - 60V Heatsink Planar N-Channel Power MOSFET (Thinki Semiconductor)
HS527 - OTP Encoder (SilvanChip)

Other Datasheets by ChipSourceTek

Full PDF Text Transcription

Click to expand full text

HS517R Omnipolar CMOS Output Hall Effect Switch General Description The HS517R Omnipolar Hall effect sensor IC is fabricated from mixed signal CMOS technology. It incorporates advanced chopper-stabilization techniques to provide accurate and stable magnetic switch points. The circuit design provides an internally controlled clocking mechanism to cycle power to the Hall element and analog signal processing circuits.This serves to place the high current-cons uming portions of the circuit into a “Sleep” mode. Periodically the device is “Awakened” by this internal logic and the magnetic flux from the Hall element is evaluated against the predefined thresholds. If the flux density is above or below the B OP/BRP thresholds then the output transistor is driven to change states accordingly.

Published: Jan 7, 2024 |